10000mA Portable Power Bank External Battery Pack and Charger with 5V 2A USB port for cell phone, Tablet PC

Specifications

10000mAh  Universal power bank for iphone/ipad 

1)Product Feature:    

The iPower10000 used a rechargeable Li-polymer battery with high capacity, ultra-thin, ultra-light, high compatibility and other features. iPower10000 can be charged by the universal adapter which adapt to the global AC voltage, it also can use the computer's USB Port charging. The product has a USB Output Port and equipped with a charge-discharge wire and a sets of plugs, So basically iPower10000 can be charged to all mobile phone. Such as : iPhone,Blackberry,Htc,Samsung ,Nokia,Sony Ericsson,LG,Lenovo and other mobile phone.Apple iPad tablet PC; iPod, MP3, MP4, GPS ,PSP and other entertainment products; various brands of digital cameras; and other devices which use USB 5V power supply. 

2) Product Panel:

1.LED Display ,Charging display,Discharging display and Battery capacity display.

2.USB Output Port , SYC iPower10000 give the mobile device charging output port.

3.DC IN Port, for SYC iPower10000 charging.

4.Switch,Switch button of battery capacity display.

3) Product  Parameters :

4) Using Method:

1. Charging

SYC iPower10000 put the high compatibility as design concepts, and use a wide range of input voltage and internal smart current-limiting function. Only using a adapter which output voltage during DC4.5V to 20V, the adapter output port plug into iPower10000's DC IN port, then charging, you also can use desktop computers or notebooks' USB port to charge. During charging, the LED display is red, when the light turns green, means full charged.

2. Power Display

Whether iPower 10000 in charge, discharge, no-load condition, only need to gently press the switch button, LED will show the remaining power. Green display power more than 90%; Orange display power more than 50%; Red displ

ay power more than 10%; When the battery is below 10%, red light flashing, please charge in time.

3. iPower10000 charged for mobile phone, digital products and other equipment

iPower10000 uses user-friendly design, no need to switch control, it is a plug and play device, and The Li-polymer battery without memory effect, it also can be used even no full charged.

Firstly, Users choose a suitable plug ,used the USB wire connect to the mobile device, then insert the wire's USB into the iPower10000's USB Output Port. Now, the LED shows red, it means that it is charging to the mobile device. When charging completed, iPower10000 immediately enters a sleeping mode, automatic turn-off output, and LED automatically turn off or keep the red state(Depending on the device).If the iPower10000's battery low, LED will appear red light flashing, reminding you charging in time, flashing 30 seconds will automatically cut-off  the output.