Five Gallon Water Bottle Pump Dispenser

Specifications

How the system works.

The FLOJET Bottled Water Dispensing System is designed to pump water from commercially available 3, 5, or 6 gallon water bottles. The system delivers the bottled water under pressure to a sink mounted drinking water faucet, or to the water inlet of a refrigerator icemaker, coffee brewer, or other water tap.

When the suction wand is inserted into the water bottle, it activates the float switch on the end of the wand and turns on the pump. This same float switch shuts off the system when the bottle is empty. The wand has a built in back-flow valve that prevents water in the system from flowing back into the bottle, or spilling while changing bottles.

The dispenser system's pump module automatically adjusts the flow and pressure to fill an icemaker or dispense chilled water from a refrigerator door tap, and stops when the icemaker is full or the water valve is closed.

Features:

Float switch for automatic shut-off when bottle is empty

Built-in check valve to prevent back flow

Universal seal cap fits most water containers

Compact size for easy mounting

20 in. (6.1 m) discharge hose included

Easy installation

Specifications:

Max. Flow Rate: 1.0 gpm (3.8 lpm)

Max. Pressure: 40 psi (2.8 bar)

Dimensions: 3.0 H x 5.5 W x 7.5 D inches (7.6 x 14.0 x 19.0 cm)

Voltage 115 or 230 VAC 12 Vdc

Amp Draw: 12 Volt 3.0 Amps. Max.

110 Volt 0.5 Amps. Max.

220 Volt 0.25 Amps. Max.

Cycles: AC models 50/60 Hz

Weight: 2.9 kg

Model Volts Max. Flow Pressure Max.Amps Standard

gpm(lpm) Shut Off Includes 20 feet of 1/4" tube

SFDW1-01-40-01 12V DC 1GPM(3.8LPM) 40PSI(2.8BAR) 3 12 inch lead wires

SFDWA1-01-40-01 110V AC 1GPM(3.8LPM) 40PSI(2.8BAR) 0.5 6 feet cord with plug

SFDWA2-01-40-01 220V DC 1GPM(3.8LPM) 40PSI(2.8BAR) 0.25 6 feet cord with plug