Aluminum foil for pharmaceutical packaging

Aluminum foil for pharmaceutical packaging

Features:
1) Resistant to gas, moisture, light and chemical
2) High stability and sanitation standards
3) one side coated HSL for heat sealing with PVC, PVC/PVDC or ALU ALU FOIL. Aclor film
4) Applications: Blister packages for pharmaceutical products, such as capsules and tablets
Specifications:

1) alloy:8011/1235/3003

2) temper: Hard /soft
3) width: ≤1500 (according customer requirements)
4) Thickness: 6-30micron (before coating)

5) Classification: Unprinted, printed

6) Coating thickness options:

1 .4-6GSM with tolerance of +/-0.5GSM

2 .6-8GSM with tolerance of +/-0.5GSM standard, if not specified, heat sealing coating is 4 with a with tolerance of +/-0.5GSM , both seal strength with PVC/PVDC  8N/25mm min,

3 .primer or OP: 1 GSM

7) printing and lacquer coating: printed as per tex, layout and shade approved by customer. for non-printed specification, clear lacquer to be coated as a protective coating and good printability. Printing inks and lacquer coating are capable to with standard 180deg. C for 1 sec. dwell time.

8) structure: HSL/ALU FOIL/printing layer/OP

         HSL/printing/ alu foil/printing/OP

         HSL/printing /alu foil/OP

         HSL/ALU FOIL/ OP

         HSL/ALU FOIL/primer (printable)

9)Inner packing: core dameter:76mm, out diameter: 240-280mm Max ( as your requirements)

10) Out packing: protected by plastic bag, foam, hard carton, wooden pallets.

taifa aluminum co,ltd located in gongyi industry area,HeNan province,

where is one of the biggest aluminum ore in china,factory covers 110,000 square meters,

owns many advanced technical equipment,specialize in aluminum sheet/aluminum coil/aluminum foil  

in diffirent sizes ,temper,taifa aluminum always keep small profits but quick turnover,

so we have a competitive price at the same level,

 hope your enquiry,and i will give you my competitive quotation