factory hot dip galvanized chain link mesh used in safeguard area,military base

hot dip galvanized chain link mesh used in safeguard area,military base

1.Material:low carbon steel wire.

2.Weaving and feature: twist and weaving, Firm and beautiful. 

3.Barbed length: 1.5cm-3cm 

4.Using:as the protection net in industry, agriculture, animal husbandry, dwelling house, plantation or fencing, grass boundary, railway,highway,etc.

5.Surface treatment : Electro galvanized,Hot dipped galvanized,PVC coated.

6.Type of weave:single twist barbed wire and double twist  barbed wire.

How to construct the barbred wire mesh...

1. • 1

     Put on leather gloves. Dig several 8-inch wide, 24-inch deep holes to insert the support posts along the line where the barbwire fence will be installed .

   • 2

     In a wheelbarrow, mix one part dry cement with four parts sand and mix using a mortar hoe. Spray the cement and sand with a hose and mix again.

   • 3

     Set a 4-by-4-inch lumber post into the first hole, centering it up. Pour the concrete mixture into the hole to create a post footer.

   • 4

     Mix more concrete as needed, setting posts into each successive hole about 6 feet apart. Allow the concrete to dry for 24 hours.

   • 5

     Hold the end of barbwire line against the first post and staple it, straddling the barbwire between the staple barbs. Hold and fasten two to three more barbwire lines to the first post as well.

   • 6

     Stretch the barbwire strands to the next post and staple each wire to the post. Continue to staple the wires to each successive post until the property is encircled.