Traffic security vehicle access car park road barrier,parking lot management system

WQH PMS Working Steps:

How To Entry ?

Step 1----- The Vehicle covers the Loop coil.

Step 2 ----- Driver press the push button on the entry parking case.

Step 3 ----- The card dispenser spit an RFID Card. system recording all the information.like data.entry time.

Step 4 ----- Boom barrier open automatically

Step 5 ----- After driver pass the 2th loop coin. The Boom barrier close automatically

How To Pay and Exit ( For Manual Payment )?

Step 1----- Vistor drive to the payment centre station and give his to the operator (Station near the Exit point )

Step 2----- Operator put the card in the card issue device

Step 3----- System shows the card information on the LED display automatically.

Including The card holder. How long the car stay inside the parking system. How much need to pay

Step 4----- After driver pay the cash. Operator click " open barrier ". then boom barrier open

Step 5----- After the car pass the loop coil. the boom barrier close

How To Pay and Exit ( Auto-Payment Station ) ?

Step 1----- Vistor drive to the Auto-payment Station and place card on the reader

Step 2----- The auto-payment machine show how long the car stay and how much need to pay

Step 3----- Vistor Insert Coin or Notes to the bill acceptor then print out receiption

Step 4----- Vistor take the card to the exit point and place on the reader. then barrier open automatically

Step 5----- After the car pass the loop coil. the boom barrier close