SMD Rework Soldering Station of AIDA 852AD+ HOT AIR & IRON 2in1 WELDER Spares 3 Nozzles

2 in 1 Hot air station with Soldring iron for AIDA 852AD+

Specification:
Power Voltage: 220V AC or 110V
Power Consumption: 270W (Max.)
Air: Brushless Portable Engine and Heat System
Capacity: 24L/min (Max.)
Leakage Voltage of Iron Tip: <0.5mV
Standard Iron Tip: AT-900M
Hot Air Temperature: 100 to 480C
Tip of Iron Temperature: 200 to 480C
Outer Dimensions: 187(W)x150(H)x245(D)mm

NOTE: This machine as lacks of pumps it wont produce the usual noise of the pump when working, the machine tends to have more longevity like this, and the engine which is mounted in the hand gun, can be replaced easier in any case. The air flow is better and more stable due to a better digital control design. Remember only DGC offers you the right nozzles in the world for this machine, do not let others give you the nozzles that are not proper for this machine, the nozzles for this machine have a special coupling shape and features. Also the inside of the nozzle has to be designed for this kind of air flow. Do not let others fool you with cheap pumping nozzles for this kind of machine.
 

Weight: Around 5 Kilo with Packing

Packing included:
Rework station with Air Output
Rework tray
Soldering iron holder
Soldering iron
Soldering Iron Foam
I will include 3 Single Nozzles
English Manual Only


This is a brand new, Model 852AD+  soldering/rework station from AIDA, an entry level desoldering/soldering rework station for surface or whole mount components. With 852AD+ , you get a temperature controlled rework station in a compact and convenient setup for the Air and Heater knobs to control the heat and volume of air produced.
With the hot air output of this unit, you can perform surface mount rework in seconds, without damage to either components or PC boards. Just attach a nozzle onto the hot air tool, place the nozzle over the QFP, SOP, PLCC or SOJ to be desoldered, apply hot air to melt the solder without ever touching the component or PC board, and gently lift the component from the board. Soldering of the replacement SMD is just as easy. Other applications include thermal testing of electronic components, shrink-wrapping protective packaging, and welding thermoplastics.

The 852AD+ SMD allows soldering of QFPs and SOPs with its wide range of adjustment of the air volume and temperature settings. For greater efficiency the same nozzle can be used for both soldering and desoldering. It also features automatic cooling to protect the heating element and handle when the power switch is turned off. This rework station is ESD-Safe  and it is made of metal and coated with a static-dissipative paint and allows for Soldering and desoldering QFPs and SOPs.