Easy Use Water Detector Metal and Mineral Detector Digital DC Induced Polarization Receiver

Easy Use Water Detector Metal and Mineral Detector

Specifications

Resistivity meter
Electrical ground exploration
Geologycal, Geophysical instruments
Ground tomography
RES, VES measurements

WDJS-3 Series Digital DC Induced Polarization Receiver

WDJS-3 is the latest time-domain induced polarization receiver in high-power IP system. It is able to directly primary electric potential, and apparent polariability at four different periods of time (M1-M4) that available for one voltage supply, in addition to secondary decaying curve.

WDJS-3 is the latest time-domain induced polarization receiver, working with short lead wire. In operation, a WDFZ-5T or WDFZ-10T series high-power intelligent transmitter may be the power source and several receivers could work simultaneously; what's more, the receiver can measure with several channels, which multiples the working efficiency.

It is able to directly measure and store SP, primary electric potential, and apparent polariability at four different periods of time (M1-M4) that available for one voltage supply, in addition to secondary decaying curve, and thus provides future data analysis and processing with maximum flexibility.

Application:

•   Metal and non-metal mineral resources prospecting

•   Groundwater

•   Engineering geology

Main features: 

•   Multi-channels, high efficiency: maximum time-share working channels are 20 (1, 6, 12 and 20 channels optional, according to specific order). For 20-channel receiver, maximum 21 electrodes to be connected; system could also divide it into two sections and measure twice (even channels or odd channels) but acquire 20 readings of measured data from each electrode pair. Through this way, the efficiency of field work is dramatically improved.

•   High performance: each channel of the instrument is absolutely isolated from electrical influence (which is equal to the performance of several single-channel receiver), and thus keeping free from the shortening of channel range or incorrect measuring results because of pseudo isolation among channels when the common-mode voltage is relatively higher.

•   Support several synchronization modes: It includes software synchronization, quartz clock synchronization, and optional GPS synchronization and so on. Among those, software synchronization is conventional method enabling system be compatible with conventional time-domain IP survey system; while quartz synchronization and GPS synchronization are the latest inventions of BTSK which have to cooperate with WDFZ-5T or WDFZ-10T series high power intelligent transmitter. Because of the fast measuring speed, it is very suitable for regions with weak signals or high interference where are impossible for ordinary synchronization modes. 

•   Automated: single-chip compensates and adjusts SP, wave filtration automatically, and thus enhances signals. 

•   Fast and precise measurement: waveform technology with auto-recognition combined with various synchronization modes, which ensure the high precision of turn-off time and polarizability measurement. At the same time, it avoids the problem of the enlarger of apparent polarizability error results from excessively estimated turn-off time error by its similar instruments.

•   Built-in real time clock: instrument is designed with a precision real-time clock, which records time automatically. Time parameters at the measuring action are stored together with measured results respectively, facilitating calculation of apparent resistivity in the future.

•   Mass memory capacity: memory capacity is up to 1GB (extendable), able to store over 1,000,000 readings of current information; all these data are under power-failure protection. Compact design, lightweight and portable

•   High-resolution LCD display (with backlight), support English and Chinese edition operating interface, and real-time curve dynamical display.

•   Low power consumption: with large-scale CMOS integrated circuit and special stand-by working method; power supply will be cut off automatically once stand-by state overtimes.

•   Data stored in flash U disk format: instrument supports data check out though USB port, and it is recognized as a common flash U disk memory automatically. Data could be edited in the same way with common flash U disk.

•   Sealed constitution: features waterproof and dust-proof design, long lifetime and so on.

Technical specification:

WDJS-3 digital DC IP receiver divides into signal channel and multi-channel. The multi-channel include 6, 12 and 20(means the channel number at different time), which also could be set according the requirement. The main technical specifications and the difference between signal and multi channel:

CHONGQING GOLD MECHANICAL & ELECTRICAL EQUIPMENT CO.,LTD

Established in 2009,Gold is a high -tech enterprise specializing in design,manufacture and sale of geological instrument.

Gold's products are manufactured stricity in accordance with industrial standard and have passed through quality and technical standard evaluation as well  as quality inspection. In 2010,Gold passed through ISO9001 International Quality System Certification.In July 2010,Gold obtained provincial certification of high-tech enterprise,becoming an excellent supplier with outstanding product quality in China.

                                                    Gold's Products Spread  All Over The Word     

                                                        Provide Professional Technical Training

                                                   Excellent Team And Best After Sales Service

  We are ready to provide perfect service for you !