soldering iron heater with advance ceramic heating technology

Specifications

Ceramic Heater Existing Specification:

Dimension: Φ3.8*58mm

Voltage: 110V / 220V  

Resistance: 160~120Ω / 400±10%Ω 

Dielectric sttength: 3750V, 5s, Leakage current ≤ 0.5mA  

Flexural strength: ≥300Mpa   

The thickness, width and length can be adjusted at random as required by customers.

Ceramic heaters for high precision soldering irons. By taking advantage of the key features of the alumina heater such as small size but high power, quick heat up rate, high insulation performance and high reliability, they are used for very accurate soldering work as well as solder sucking equipment and automated soldering robots.

Ceramic heater's advantage is as following:

1. Fast speed of heating, high rate of heat utilization.

2. Custom designed temperature distribution available

3. Resistance of high temperature and high insulation rate.

4. High resistance of high temperature creep.

5. Superior chemical resistance.

6. Excellent energy saving, safe and no electric noise, long lifetime.

7. High levels of insulation allow direct contact with water, kerosene and metal.

Property Advantage:

1. Superior Thermal Properties. Heat rapidly. High power density, the most of that is 30 W/cm2.

2. R-T characteristics. It has the characteristic of positive temperature coefficient, and can test and control the temperature of heating element make use of the temperature of characteristics.

3. High reliability Superior electric strenghth and volume resistivity. So may contact with metal and water directly. Superior chemical resistance. Low ageing and long life.

4. Environmental Qualities No electric noise Energy-saving No harmful element.