license plate frame (MD-01A)

Instructions of the burglar-proof license plate

1. The main engine should be installed in the gauge pedestal or under the drivers cushion with three--meter wire connected to the front license plate and five-meter wire to the back licence plate. Of the two-branched power cord, The red one should be connected to the anode of the battery and the black one to the cathode.

2. The installation of the lead: take the original front and back license plate apart from the car, then install the lead of the burglar-proof license plate along the original installation way, during witch excessively pull, press and cut of the lead wire should be avoided. If there isnt enough space for wire leading from the back license plate , car compartment, wheel-house to the from license plate, a driller can be used to make a hole for wire installation, at last, put on the coil and apply some glue.

3. Installation of burglar-proof license plate: Packing the original car license plate into burglar-proof license plate, use installs of 8 crew cut stud bolts fix in front and back of license plate respectively. Notice: all of four bores need to lock tightly, and the stud bolt cant add a mat slice, in order to prevent the license plate to raise or the stud bolt head too high, it will be influence usage effect.

4. The lock bolt is fixed, if the car owner needs to install a nail hat which is requested by transportation management department, you can pull out the bolts in the lens of license plate, dismantled the lens, use installs of 4 long stud bolts, fix a license plate then button up to a nail hat.

Elucidation:

Our company developed a burglar-proof frame for license plate, adopted the forerunners electrical engineering technique nowadays. The single slice machine wove the distance control technique, electric current examination and remote control to jump many technique of codes etc. a development but become. Product Elegant, longevity, can satisfy completely the kit need of medium or upscale car .License plate size: 452*155*25 mm, bottom frame size: 446*148 mm, the weight is a 1.2 KG/per, control host size: 110*90*30mm.Stop to depend in a parking of the cabaret or other amuse place, can cover at any time, satisfy privacy a demand!

Characteristics:

1. It is completely same as the common license plate in appearance. The thickness, width, side breadth of this product is also completely consistent as common license plate, also it can envelop by an original license plate, the appearance is very exquisite! The host can install under the seat or inside gauge pedestal, concealment.

2. Widely applicability. The net size is 445*148 mms of the license plate bottom frame: It suits the brands of various different specifications

3. Hangings rolling quickly, it can wireless remote-control within 50 meters. Heading up or getting down the roller blinds just need 2 seconds to accomplish it, completely satisfying the effective demand that when you meet the urgent matter walks faster.

4. It is antirust, long-lived. burglar-proof license plate adopt a high-quality stainless steel, plank material is high intensity, never rusty; The roller blinds adopt for use by the military canvas, the complete ability is subjected to the insolation, rain pours, frost etc. various fearful of high and low temperature