Nontoxic Uhmwpe Liner Sheets

Applications

Dump truck liners

Dump Trailer Liners

Off-road dump truck liners

Side dump trailer liners

Forage Wagon liners

Forage Box liners

Manure Spreader liners

Snow Plows plastic protection covers

Overhead bin liners

Gravity Box liners

Sand Spreader liners

Lime Tender liners

Hopper Liners

Sand Hopper liners

Roll-off Truck liners

Lightweight and Durable. Protect and extend the life of truck beds, earth moving equipment, dumpsters, conveyor systems, chutes and hoppers by years.

Installation is quick and easy.

Less time spent dumping and cleaning out the truck bed

Low cost of investment and maximiz both productivity and profits.

Provide a low maintenance solution to releasing each and every load smoothly and quickly with as little wear and tear on the vehicle as possible.

Polyethylene (PE) is the most commonly used plastic polymer in the world with annual consumption rates exceeding 50 billion pounds per year. Over 70 percent of Porex products use polyethylene.



Thermal insulation materails used widly

Air-conditioner, water or wind piping system, the essential material for sealed buffer coating film etc.

Sound insulation, thermal insulation, buffer material, construct, hollow, refrigerator, automobile etc





With a linear molecular structure of repeating –CH2-CH2-units, PE is a semi-crystalline polymer that elongates before breaking, enhancing its toughness. In general, PE is considered a strong, lightweight thermoplastic with very good chemical resistance. Products made from standard polyethylene grades typically have pore size diameters ranging from 7 to 150 micrometers, but these nominal values can be increased to 300 micrometers with special blends.



HIGH-DENSITY POLYETHYLENE (HDPE)

Porex high-density polyethylene (HDPE) is available in sheets, rods, tubes and molded shapes. HDPE can be used in continuous service at temperatures up to 180° F (82° C) and intermittently at 240° F (116° C). If not stressed, it is stable at 212° F (100° C) in continuous service.



ULTRA-HIGH MOLECULAR WEIGHT POLYETHYLENE (UHMWPE)

As with high-density polyethylene, Porex ultra-high molecular weight polyethylene (UHMWPE) comes in sheets, rods, tubes, and molded shapes. UHMWPE is a strong, lightweight material embodying all the characteristics of high-density polyethylene (HDPE) plus the added feature of being resistant to concentrated acids and alkalis as well as numerous organic solvents. This material has the same temperature limitations as HDPE. Average pore size in micrometers: 10 and 20.

Application of UHMW-PE

1. Chemical Engineering: Corrosion and wear resistantance mechanical parts

2. Thermal power: coal handling, storage of coal, warehousing chute lining

3. Coal processing: sieve plate, filter, U-underground coal chute

4. Concrete: cement raw and finished product silo silo lining

5. Grain: food storage or chute lining

6. Mining: sieve plate, chute linings, wear anti-bonding part

7. Food industry: star-shaped wheel, transmission timing bottle screw, bearings, guide rollers, guides, slide blocks, etc.

8. Some kind of rubber fender panels and front face of rubber fender

UHMWPE sheet Advantages & Key Features:

--Highest abrasion resistance of any polymer, 6 times more wear resistant than steel

--Anti-Weather & Anti-Aging

--Self-lubricating, Very low coefficient of friction

--Excellent chemical & corrosion resistant

--superior impact resistant, Noise- absorption, Vibration-absorption

--Temperature range: -260ºC~ +80ºC; Very high resistance to cold, doesn't become fragile even under -180ºC

--High tensile Strength

--Non-Toxic and smell

--UV resistance

--Flame Retardant; relatively low in water absorption

--Excellent electrical properties

--Good performance in resisting environment stress crack, 200 times of ordinary PE

--No adhesion

--Light weight and easier to handle and fix

--Cost efficient; resulting in low energy consumption

--Does not rot, split or crack; 100% recyclable

--Great liner material for industrial material handling applications



UHMW-PE combines the advantage characteristics of all types of plastic, featuring in the excellence of withstanding wear and tear, resisting impact and chemical corrosion, self-lubricating, working against low temperature, being low in abrasion loss, light in weight, absorbing energy, anti-ageing, retarding inflaming and preventing build-up of static electricity. It is widely used in the interior lining of coal house of thermo power plants, coal mines and coking plants etc., the raw material storehouse of cement factories, steel mills and aluminum factories, the granary of food industry, feedstuff industry and pharmaceutical factories as well the hoppers at wharfs. It is recognized as "amazing engineering plastics".

1.We have a powerful hardware facilities.



2.The colors are pure and any color can be made as your request.



3.The size of fender panels are customized as your request.



4.The materials are chemical resistance and anti-UV and so on.



5.We try our best to complete your request.