anti-slip feature marine fender panels for Gambia

UHMW-PE as the ideal material for low friction, long lasting facings on any fender system or protective panel.
Virgin UHMW-PE facings last for longer, generate less friction,lower shear forces,strong tensile strength at yield,tensile strain at yield,tensile strength,enongation at break,impact strength,hardness more than other materials or grades. The most popular colours are black, yellow and blue, and other choices such as green, white, orange, grey and red are available on request.

Hongbao marine fender facing pad is made of PE material 

Because PE material has the following advantage : 

--Highest abrasion resistance of any polymer, 6 times more abrasion resistant than steel

--Do not absorb moisture and will not swell up over time due to exposure outdoors.

--Good impact intensity,Do not lose their impact strength over time.

--Good breaking elongation,so they will bend but not break under extreme loads.

--Non-stick surface, easy to clean. 

--Corrosion and chemical resistant.

--Noise- absorption, Vibration-absorption 

--Super compression strength 

--15 Percent the weight of steel pads and easier to handle

--Compressive loads up to one million pounds 

--Up to 15,000 pounds per square foot 

--Non-Conductive 

--Non-Toxic and smell 
 
HMWPE Fender Face Board/panel/sheet

What is anti-uv cheapest uhmwpe marine fender panel,anti-impact and anti-wear uhmw pe on wharf        

1.Special antiskid treatment on surface ,guarantee the safety of people and crane in use

2.Excellent wear resisting and impact resisting,longer service lifetime than steel pad and wood pad.

3.Lower density and lighter weight than other material ,easy to be used and moved

4.Excellent compressive property,could avoid damages to floor by heavy load

5.Compressive loads up to one million pounds

6.Up to 15,000 pounds per square foot

7.Good self cleaning property, the temperature range:-269°C to 85°C

8.Low water absorption, the size will not change because of the humid environment.