fswnd copper cutting tct circular saw blade/Mamba Contractor Series Thin Kerf Saw Blades

Specifications

fswnd copper cutting tct circular saw blade/Mamba Contractor Series Thin Kerf Saw Blades  .more information as below

1 Body material

Body material: SKS-51,which is imported from Japan. The body is treated in special heat treatment, so it has high precision and good balance

2,The best saw blade teeth

One of the most important things to look for in a saw blade is a good set of teeth.How long the blade will stay sharp,how clean it will cut, and how many re-sharpenings it will take all depend on the quality of the cutting tips.The cutting tips of fswnd saw blade are imported from Luxemburg .and hard enough to bear high pressure,So it could extend the cutting life of saw blade.

3,Advantage

1) Wood cutting saw blade. Circular saw blade. With left/right saw tooth. Suitable for cutting various sold wood with excellent smooth and edge.

2) It is applicable to the computer controlled tandem slitter .and the design of saw blade assembly enable cutting surface to be smooth and noise to be reduced.

 3) Less chipping .help you save material

4,Tooth configuration

saw blade for cutting copper with flat-trapezoidal tooth.This tooth configuration excels at cutting hard materials like laminates,MDF,and plastics.Teeth alternate between a flat raking tooth and a higher "trapeze"tooth.This configuration is also used for non-ferrous metal cutting blades.

5.Some pictures