Wire Mesh Light Medium Duty Garage Shelving Steel Angle Rack

                                     Reason 1: Good services, free design
                                     Reason 2: High quality Q235 cold rolled steel, smooth surface without burrs,  plastic powders never fade  
                                     Reason 3: Double layer design to enhance shelf load capacity
                                     Reason 4: Environment-friendly plastic powder, no poison, no pollution
                                     Reason 5: Butterfly holes design,beam plugged in , easy to install.
                                     Reason 6: Foot protection increased surface friction, more stable.

Quick Detail:

1.This storehouse storage rack is made of Q235  Cold rolled steel
2.Comes with a set with upright, beam, steel or wood plate
3.Loading capacity is 100kg to 500kg per layer.maximum height 6m normally
4.Finish: galvanized with spray  paint on the storage steel rack
5.The storage rack is Anti-rust ,Corrosion-protection
6.This kind of stoarge rack is available for hand works or with ladder
7.Easy to assemble or dispatch the steel rack
8.The distance of the rack each layer is adjustable
9.The color of this steel rack we have blue/grey/blue  mixed orange.
10.Usually used in factory, stores, supermarket,logistic center,industrial storage system, warehouse storage system etc
11. 3 years of warranty of the storage steel  rack

TECHNICAL DETAIL

All of the shelf components are made of Wisco  steel and storehouse raw materials processed by cold rolling of profiles, 
the strength index is as follows

     Racking strength indexes of cold rolled profiles(N/mm2)

     Racking strength of welds(N/mm2)

manufacturing process
Raw materials(Wisco)→Cold rolling→Fixed length→Punching(Welding)→Rectify→Surface powder coating→Packing→Finished product
Surface treatment:
The process flow:Raw material→Unoil→Rust removal→Pre-dips→Phosphating→Drying→  Powder coating→Curing→Packing
1. Shelf surface treatment using electrostatic spray process of epoxy, powder coating 60~80 microns
2. Electrostatic powder spraying adhesion level 0 in GB92865-88 standard requirement.
3. Hardness(abrasion resistance) as 100 times more than ordinary lacquer, achieve GB6739 the 2 h - 86 standard requirements, namely the 2h pencil test without scratches.
4.Corrosion resistance (hydroelectric acid) GB1771-91 more than  500 hours.
Accurate color configuration and material requirements:
Column: Color RAL5010——Blue;Material Q235,Wisco.
Beam:Color RAL2004——Orange;Material Q235,Wisco.

1. Q: Are you a factory or trading company? 

A:We are a manufactory

2.Q:Where is your factory located? How can I visit there?

A:Our factory is located in Guangzhou City, Guangdong Province, China, You can fly to Guangzhou airport directly. We will pick you up on Guangzhou international airport All our clients, from home or abroad, are warmly welcome to visit us! 

3. Q: What makes you different with others?

A: 1) Our Excellent Service

For a quick, no hassle quote just send email to us

We promise to reply with a price within 24 hours - sometimes even within the hour.

If you need an advice, just call our export office at 0086-13699703517, we will answer your questions immediately.

2)Our quick manufacturing time

For Normal orders, we will promise to produce within 15 days.

As a manufactory, we can essure the delivery time according to the formal contract.

3)Our Special Export Design

We pay very much attention to the export packages. We have plastic clips on the beams to protect the beams from surface

damage in the transportation, We have got the whole uprights wrapped with transparent plastic film. 

4)Our Warranty Time

The High Standards in the Design and Manufacturing ensure us to support the products with a 10-Year Warranty Time for 
your normal use, it is the Longest Manufacturer's Warranty !

4. Q: What is delivery times?

A: This depends on the product. Typically standard products are delivered within 20 days. 
The delivery time of the special products is according to the time of setting up of the tooling.

5. Q: What is the term of payment? 
A: 1) T/T payment.

     2) LC

6. Q: May I know the status of my order?

A: Yes .We will send you information and photos at different production stage of your order. You will get the latest information in time.

7. Q: Are samples available?

  A:  Yes, we can send some sections of samples for your reference by express.