Well Used Mixture Oil Purification Project For Industrial Oil

Application:

Using Places:

DIY Multi-Function Lubricating Oil purifier is widely applied in electric power, metallurgy, mines, machinery, chemical engineering, traffic, manufacturing, food industry, etc.

Process Following Lube Oils:

To process various used lubrication oils, such as gear oil, engine oil, hydraulic oil, freezer oil, compressor oil, vacuum pump oil, internal-combustion oil, heat treating oil, etc.

Removed impurities: 

moistrue, gas, tiny hydrocarbon and acid from oil by flash evaporation to enhance the oil quality and recover the nature of lubricating oil, almost like new. 

Characteristics:

1.      The filter elements with different precision consist of fine and multi-stage filtration system,   which can effectively remove mechanical impurities in waste oil.

2.      Excellent breaking emulsification, degassing and dewatering system, which adopts three-dimensional wide flash vaporization technology and membrane evaporation technology to deeply separate moisture, gas, light hydrocarbon and light acid away from oil.

3.      Advanced pressure protection system and level control system to make sure a safe and reliable operation.

4.      Stably automatic and manual electric heating temperature-control system guarantees the o balance oil heating and constant temperature.

5.       Adopted high effective air-cooling condensed system which is good at cooling the steam to water and draining it out.

Relative Information

Why do we choose oil purifier?
After a period of operation, owing to its exposal to oxygen and mixed with water, copper and iron and other foreign materials and high working temperature acceleration , transformer oil will oxidize and lose its original property and cannot be used effectively again. So Wanmei oil purifiers can efficiently remove water, dirt, gases and other foreign impurities from oil, such as de-electrical oil, turbine oil, lubricating oil, engine oil, hydraulic oil, compression oil, mechanical oil, quenching oil, heat conducting oil, gear oil etc; so as to maintain its lubricating and insulating property, then to reduce components wear, and cut down oil expenses.

What Oil can we process?

we can process turbine oil, transformer oil , insulation oil, switch oil, capacitor oil, gear oil, vacuum pump oil, bunker oil. engine oil, hydraulic oil, black oil, diesel, freezer oil, compressor oil, vacuum pump oil, heat treatment oil, fire-resistant oil, machinery oil and other lubricant oils. 

Meiheng Cases and Hardwork

Maintenance
A. check and adjust after oil purifier works for a period of time
   1. all the electric control apparatus
   2. temperature controller
   3. oil seals and motor couplings
   4. clean filter elements, check pumps and motors
   5. all the pipes for leaking
B. Clean the motor and change the lubricating grease
C. Check and add specified lubricating oil to vacuum pump,
D. If oil purifier is not in use for one month or more, put it on a dry, flat ground, close all valves and electric cabinet, cove the whole machine with canvas.

Return & Feedback
We can provide the main component for each marking machine. You can send back the unqualified spare parts to maintenance or replacement the new spare parts for your marker.

After-sales Services

One year guarantee for product quality. (People damaged parts are charged).
Lifelong maintenance and spare parts supply.
Free design of fixtures as customers required.  

Business Scope:

oil purifier,  water treatment appliance, oil purification machine, water filtering machine, oil filter, oil filtration device, oil filtering machine, oil purifying equipment, oil regeneration system, oil regenerating plant, oil recycling machine, oil recover, oil recocery plant, oil renew , oil reclamation unit