From gold supplier Q1327 pipe thread lathe machine with low price

Outline size

L:                      3553mm

W:                      1450mm

H:                          1505mm

Machine weight: 5300kg

Max.swing diameter on the bed 800mm

Diameter of pipe 70-273

Max.outside diameter of pipe  1000mm

Max. taper              1:4

Tails quill diameter                  930mm     

Spindle

Spindle bore                   280mm

Level of spindle speed                 9

 Range of spindle speed                7.7-230r/min

Feed system

Vertical and horizontal feed species                                                       18

Thus feed range

Processing metric thread number            4

Transverse 0.04-0.65mm

Inch thread processing number               6

Longitudinal0.1-1.46mm

Pitch processing metric thread           2,3,4,6mm

Inch thread processing pitch           4,5,6,8,10,12t.p.i  

Saddle longitudinal moving speed      2.5m/min

The slide board box handwheel rotates a saddle longitudinal travel     0.20mm

Tool carrier

The knife frame maximum stroke     210mm

The surface of the knife section size 30×30mm

The cutter turntable rotation angle    ±90°

The knife frame dial rotates every one stroke of knife       0.05mm

The lower sliding plate dial rotates one grid knife stroke     0.1mm

Spindle center line to the tool installation datum vertical distance      33mm

The tailstock

Top sleeve diameter     100mm

Top sleeve travel    250mm

Top sleevetaper   Morse6

Tailstock lateral movement amount   ±15mm

The top taper   Morse6

The power part

Gear pump belt    1-A800  

Rapid motor    2A0S5632  0.37KW 2700r/min 

The main motor belt    B1854

Clamping motor    1.5KW2860r/min

Gear pump    CB-B6  2.5Mpa    1450r/min

The main motor    15KW 1460r/min