Specifications

  Rubber Fining Mixer/Rubber Mixing Mill

nstruction

This machine consists of Base,Rack,Gland,Rollers,Bearing,Transmission device,Lubrication device,Decelerator,Adjustment device of the roller temperature,Emergency shutdown device and brake rigging and etc.

2.uses

Open Mill: Special alloy steel made rollers with hard and abrasion assistant surface never

delaminate. Motor reducer with hard tooth surface single axial output transmission mechanism

ensures large torsion and low noise. Human-orientated design for safe purpose protects the

operator in emergency case by emergency stop and reversing device.

          This machine is suitable for factory lab, colleges, R & D institutions for recipe researching and

sampling. Our equipments are widely used in mixing, plasticizing and sheeting of Rubber, Plastic

and Chemical materials.

3.Features

 1. Chilled alloy cast iron roll is abrasion resistant with long service life.

 2. There are two kinds of Nip adjustment mode for option:manual or electric.

 
3. There are three kinds of Main bearings for option:Bearing or Copper bush or Nylon bush.

  
4. Machine will be tripped off if overloaded to protect valuable electrical circuit.

 
5. All electrical connections are well,short circuits is impossible by any means. 

6. There are many speeds and speed ratios available, which can satisfy most customers’ formula and processing requirements.

 4.Main parameter:

Picture one : XK-160 lab rubber mixing mill . Mainly used for lab use

picture two : XK-250 rubber mixing mill . production capacity is about 150 kg/h

picture three : xk-360 rubber mixing mill .Production is about 250 kg/h

picture four : xk-400 rubber mixing duction is about 350 kg/h . From this model , we begin distiguish configuration . NYLON , COPPER , ROLLER BALL BEARING.

picture five:XK-450 rubber mixing mill . two configuration , stock blender is choosed . 500 kg/h

picture six : XK-560 . two configuration , stock blender . production is 500 KG/H

picture eight : XK-660 rubber mixing mill . production capacity 2000 kg/h

Brief Introduction of our factory:

Qingdao Yahua Machinery Co.,Ltd is situated west of Jiaozhou and east of Qingdao Economic Developing Zone, near No.,204 National Road and Tongsan High Way.

We are very professional rubber machinery factories here. OUr products are well-known from different areas in domestic and overseas.

Our slogan is: Quality makes survive. Technology makes develop. Good service deserves good reputation. Good results deserves good organization. We are keeping on working hard and develop better products.  Looking forward our long friendly cooperation with people from all of the world.

Contact Person: Bella

Office Phone:  0532-83132191/85165781

 Fax Phone:  0532-83137817/85165781

Mobile phone:13325017346