Clear Soft/Flexible Polyurethane/Pu Resin for Sticker/Label(direct factory)

618AB-18 is a two components polyurethane system with the mixing ratio of 1:1, can be cured under normal temperature and high temperature, it forms a very high gloss and transparent coating to its applications such as nameplate, signage and decorations. It is specially designed for the applications requires a soft and flexible clear coating. After cured, it will has a very good features of UV resistance and weather resistance, can be for outdoor use, and can meet the strict requirements for car raw materials, will not yellowing for about 3 to 5 years for outdoor use. 

Features

1, With long pot life and fast heat curing to save time.

2, With low viscosity and good natural defoaming, come to a high gloss and bright surface after cured, without ripple.

3, Very high transparency, with good elasticity and bonding strength.

4, With very good weather and UV resistance for outdoor use, can be used at the temperature of 0 ℃ to 100 ℃.

  Product  Gallery

Properties before Hardening

Operation

Hand operation process( long pot life and curing slowly):

1, Place 618A-18 and 618B-18 at the temperature of 15 to 25 ℃, relative humidity lower than 70% for 12hours.

2, Well prepared the products you need to apply the 618AB-18 such as the PVC signage/nameplate, metal signage/nameplate, put them into the oven to heat at the temperature of about 60℃ to clear the moisture on the surface.

3, Totally clear the dust and the oil on the surface of the signage/nameplate.

4, Weigh the 618A-18 and the618B-18 by 1:1, and fully stir it.

5, Clear the bubbles by vacuum machine(the mixture will not have bubble at the -0.1 vacuum)

6, Take a clean syringe to draw the mixture and drop it to the surface of the well prepared signage/nameplate. Normally the thickness is 2mm.

7, Look at the glue in 5 minutes, if there is some bubbles, use a pin to break the bubbles, or if there is some area that has not been covered by glue, use the pin lead it.

8, Put the finished products in the oven at the temperature of about 60 to 80℃, it will cured in 2 to 3.5 hours.

Machine operation process:

1, Place618A -18 and 618B-18 at the temperature of 15~ 25℃, relative humidity lower than 70%, and no-dust environment for more than 96 hours to remove the bubbles caused during the transportation.

2, Input the pump, sealed and fixed it, keep it for 12hours.

3, Place the signage/nameplate to a flat place, and fix it.

4, Clear the dust and oil on the signage/nameplate surface.

5, Clean the pipeline, mix container and the head with dichloromethane.

6, To clean up the air in the pipeline, mix container, and the head.

7, Drop the glue onto the signage/nameplate surface.

8,Use a pin to lead the glue and remove the bubbles by it.

9, Place the signage/nameplate at the temperature of 60℃.

10, It will cured at about 2~4 hours.

Properties after Hardening

PE bucket(5kgs/bucket or 20kgs/bucket)

1, Why Choose Jinhuaglue?

1) Jinhuaglue owns ISO9001-2008 audited factroy of 3500sqm, all the materials are offered by factory directly.

2) Jinhua has R&D team, we accept OEM, and small order is acceptable

3) Jinhua has already ship to over 30 countrys, aboudant experiecnce on the exporting.

4) Jinhua with output of tons per day, ensure the fast on time delivery

5) Jinhua keeps all the samples for each shipment, so that to make the quality trackable.

 2, What Kind of Quality Certificate Jinhua has?

1) REACH,

2) Rohs

3) CPSIA

4) ASTM

5) EN71

3 Do Jinhua has MSDS for shipment?

 Yes, we do have MSDS for shipment all all our epoxy and PU resin