water cooling chiller CW5000 used for 130W laser tube

water cooling chiller CW5000 used for 130W laser tube  

CW5000 this model is widely used in laser printing,laser cutting,laser engraving,laser marking,CNCRouter,specific disconnection alarm security protection ,real-time temperature monitoring,accurate knowledge of heating devices working conn,but it have some caution should be noticed. 

1.Cooler should be placed in a well-ventilated, dry environment place and away from heat sources.

2.Please keep at least 30cm from obstructions to the air outlet which is in the back of the cooler,and should leave at least 10cm between obsturctions and air inlets of two sides. 

Features 

1) Convenient for installation and operation

2) Integrated electronic control, large digital displays

3) Single temperature, single control

4) Low flow alarm

5) Over heat and over low temperature alarm

6)One-stop automatic intelligent temperature control: in different environment, user does not need to change setting due to it will automatically switch
to appropriate operating temperature.

Instruction:

Open the package to check if the machine is intact and all the necessary accessories are completed .

Open the injection port, then add cooling water.

According to system conditions ,connect the water inlet and outlet pipe well.

Plug in power,turn on the power switch,(Do not allow the water overflow

Check the water level of the water tank again.(It should be 80-150mm from the surface of water to the injection port).

Delivery time:

2-3 days after receiving the payment