OSB machine manufacturer/supplier/1220x2440m8to30mm

OSB(oriented strandboard) is widely used in construction, packaging,

furniture, decoration, etc., and OSB is also well-structured materials and

outdoor materials.OSB has a series of features,such as good stability,low

material  consumption,highstrength,water resistance,and environmental

protection. 

we can also produce the different sizes of OSB making machines according to the annual output of the boards as to our customers' requirements.for example 6x9feet

these pictures are take from our customers in Linyi ,the capactiy is 100000 cmb one year .if u want to know more about it ,contact me .

1) Chip preparation section

  Raw material is reduced into qualified chips by the drum chipper, then the chips are transported to the chip bin, and then feed to the knife-ring flaker by which the chips are turned to flakes,then the flake stored in wet flake bin.

2) Drying and sifting section

  The flskes discharged from the wet flake bin are conveyed to the rotary dryer. Qualified core flakes are stored in core flake bin; oversize flakes are send to mill to be re-crushing, and transported to surface flake bin.

3) Forming and hot-pressing section

  The surface and core flakes are sent into classi-forming machine, and forming on the mat conveyor uniformly. After process of metal remover , pre-press, lengthwise saw, cross saw, accelerate conveyor,scaling conveyor , storing conveyor and loading conveyor,mats are transported to carrier and then to hot pressing. Rough boards after pressing are pushed to unloader via pallet.

4) Cooling and sizing section

  The rough board is conveyed to star-cooler for cooling ,then the rough board goes through side trimming saw and become a qualified particle-board, stacked on the hydraulic lift.

5) Sanding section:

  The board are sanded,checked and stored.

  PLC control is used in mat-forming section.