Organic Cooling Sofa Cushion From Shanghai

organic cooling sofa cushion from Shanghai 

1.Compamy Profiles:

   Shanghai Feikang Cushion Products Factory is located in Shanghai, the economic

When contact with high temperature, as energy just run from the higher to lower, the phase change material will absorb the heat from the higher and slowly change from solid state into liquid state. .At this time ,the PCM’s temperature do not change. Untill all PCM change into liquid state, its temperature starts to go up.This progress can last for several hours ,the PCM absorb heat about 29400J/kg,in the same condition,the water absorb heat about 4200J/kg,just one of senveth. 

3.Features:

1.It can keep cool long for 5-8 hours without any energy consumption and refrigeration.

2.The PCM's state change keeps the temperature cool. When the temperature  is below 30 degree,  the PCM is in solid state, we can feel cool in this situation. When the temperature is above 30 degree, it can absorb the body heat and constantly change into liquid as the tempeature is highert and   higher, thus to reduce temperature and keep cool.

3.Keep the constant temperature at 30°C,it is 6°C-7°C lower than body temperature.

4..Based on the phase change, it recycles automatically. And its service life is 3-5 years.

5.The fabric is advanced composite waterproof fabric,which is soft,comfortable,elegant.

6.Safe and clean,low carbon ,eco-friendly,excellent quality and reasonable price.

4.Usage:      

  Cooling vest ;Cooling pet cushion  ;Cooling car seat cushion ;

 Cooling bed mattress ;Cooling sofa cushion; Cooling seat cushion ; Cooling computer pad

5.Attention of Using:

1.Using the pad in proper room and well-ventilated place.

2.You can put a cloth on the pad if you feel cold.This depends on everyone's feeling.

3.When the temperature is above 40 degree, the cooling feeling is not so good, what is more, if the temperature is higher than 60 degree or the pad in direct sunlight,you had better do not use it.

4.Do not use sharp tool, fireworks to touch the pad.

6.Washing methods: 

1.using a wet towel to wipe out the dirty.Avoid kneading  and cleaning it by hard brush.

2.There may merge moisture condensation because of the temperature difference,you should wipe out the droplet with dry towel to avoid the droplet causing mildew.

7.keeping method:

1.Please keep it in the cool,dry and well-ventilated place.

2.Please keep it clean before you store it.

8. Our main clients:

1.Nissin Kogyo Co.,Ltd( in Japan)

2.Soijtz Coperation(in Japan)

3.Kofizumi Lifetex Co.,Ltd(In Japan)

4.Itochu Coperation(in Japan).

9. Certification:

10.Factory:

 1.Company Appearance:

2.Raw Material:

3.Production Process:

 11. The Comparison with Our Pads and Other Traditional Pads