Chain Link Fence Gate

Specifications

Chain Link Fence Gate

Chain link fence gate is used together with chain link fence in airport, tennis court, zoo, and other places. We can make the vehicle gate and pedestrian gate which are welded or assembled by chain link fence fabric, pipe frame and other fittings.

• Chain link fence fabric: 2"(50mm) hole size, BWG 12 (2.7mm) galvanized wire, knuckled edge.
• Round pipe frames: galvanized
• Fittings are galvanized also, included are tension bars, clamps, hinges, latch, and drop rods (for double gates).
• Gate height: 4'-8' (1.2m-2.4m)
• Gate width: 3'-12' (0.9m-3.66m)
• Customize available

  

• You can add a center horizontal brace or vertical brace to the gate.

  Gates are approximately 2"(50mm) shorter than height indicated to allow space under bottom. Gates are approximately 3-3/4" narrower than width indicated to allow for hardware. Use two leaves to make a double swing gate of the desired width. Barb wire extensions may be added.

•   

• Some reference size for chain link fence fabric.

  Mesh	Hot Dipped					PVC Coated
  	Wire BWG	Wire Dia. (mm)	Weight kg/m²		Roll Dia  4’x50’ (mm)	Wire Dia. before/after	Weight kg/m²		Roll Dia  4’x50’ (mm)
  2" (50mm)	8	4.2	4.5	18.4	280	3.4/4.0	3.2	19.6	280
  	10	3.4	2.9	11.8	250	2.6/3.2	1.9	12.2	250
  	12	2.8	1.9	8.0	230	2.0/2.6	1.2	8.4	230
  	14	2.1	1.2	5.4	220	1.4/2.0	0.6	4.4	220
  2.4" (60mm)	8	4.2	3.7	14.3	290	3.4/4.0	2.6	16.4	290
  	10	3.4	2.5	10.1	280	2.6/3.2	1.6	10.60	280
  	12	2.8	1.63	6.8	250	2.0/2.6	1.0	6.60	250
  	14	2.1	1.00	4.6	220	1.4/2.0	0.48	3.85	230
  3" (76mm)	8	4.2	3.00	11.7	300	4.4/5.0	3.4	20.6	300
  	10	3.4	2.00	8.2	290	3.4/4.0	2.1	13.0	290
  	12	2.8	1.3	5.7	280	2.6/3.2	1.3	8.8	250
  	14	2.1	0.8	3.8	250	/	/	/