Sell Model Temperature Controller,with CE UL certificated

Specifications

Specifications:
1) Range: -20°C ~ 200°C
2) Accuracy: Grade 0.5
3) Definition: 0.1°C
4) Transducer: PTL00
5) Output junction: passive junction AC 30A 250V
6) Setup error: 0.5%
7) FS return difference: 1.5°C
8) Working environment:
a) Temperature: -10 ~ 50°C
b) Humidity: <95% RH
9) Power: <3W
10) Working power supply: AC 220V
11) Dimensions: 160 x 100 x 48mm

Applications:
1) After fixing up temperature controller, adjusting temperature switch on the
panel
2) Connecting transducer, power supply and electric heater according to the
interconnection diagram of temperature controller, then open power switch
on the panel
3) The actual measurement value of transducer will be displayed on temperature
display window
4) When temperature value is less than setup ones, it will start to heating, and
heater contact will be cut off while actual measurement temperature reaches
setup ones
5) When temperature is less than 1.5°C of setup value, temperature
controller will connect with heater again

Notice:
1) The installation location of temperature transducer can reflect the actual
temperature of temperature control point directly
2) When the wire length of temperature transducer exceeds one meter, it will
use three-wire system to increase measure precision. It will adopt two-wire
system when the wire is shorter, but 2 or 3 feet of terminal should be shortly
connected
3) When the heating load of temperature controller is larger than 2kW, it should
be connected with AC contactor
4) The temperature controller should be placed on the occasion that avoid wet
and have no serious pollution to maintain its working life
5) Please contact with the manufacturer when the working is abnormal. Don't
take shell apart to cause safety misadventure