Full Color Sending Card /led display controller ip/full color led display card

Specifications

Product name : ADS-T-1000 SD card controller

T-1000 system features:
1,32—256 Gay, Gamma correction procession software
2,Support points, lights, and surfaces light source, rules and specific-shaped handle
3,Single-port output, can support 1024/2048 light
4,Off-line control, playback content stored in the SD card
5,Input 220V AC power to achieve the same power, AC synchronous; split screen, the overall  synchronization. 

6,T-1000 store a maximum of 16 documents,can copy multiple documents to the SD card in order,file number are:00.led, 01.led, 02.led, 03.led…

NOTE:T-1000 port 512 lights, the playback speed of up to 30 frames / sec, the port more than 512 lights, the frame rate with the increase in the number of lights automatically reduced. synchronization. synchronization.

Support IC type: LPD 6803 ,SM16716,USC1903 ,TM 1812 and so on.

Specific parameters:
Memory Card:
Type:SD Card
Capacity:256MB—2GB
File Format:FAT file format
Store files:*.led
Physical parameters:
Temperature:-40℃—85℃
Power Supply:220V AC
Power:5W
NOTE:
1,To copy files to SD card ,you must first format the SD card, pay attention to is that each copy must be formatted before.
2,SD card must be formatted as "FAT" format.

The SD card in controller can not be hot-swappable, plug the SD card every time, you must first disconnect the power supply.

 Our main products(Service):

 <>LED Single light 

      8mm /9mm/12mm    Single Color/RGB  Round shape/Square shape

 <> LED Module light

      3528/5050/5630/Superflux      PVC/Stainless case Normal/Injection Module   

 <> LED Pixel light           

      12mm/26mm/30mm/45mm  

 <> LED Rigid bar/Flexible strip

 <>  Controller system and Lighting project design provider