Five-effect falling film evaporator

Wide:Five-effect falling film evaporator for milk, glucose, starch, xylose, pharmaceutical, chemical, biological engineering, environmental engineering, waste recycling industries continuous low-temperature evaporation with heat transfer efficiency, material heating time is short and other major features, it is particularly suitable for heat-sensitive, viscosity, foaming and other materials.
Components:The effect heating evaporator, the efficiency separator, condenser, hot pumps, sterilizers, heat pipe, vacuum system, the effect of solid to liquid pumps, condensate drainage pump, operating platform, electrical instruments, control cabinet and valveDoors, pipes and other system components.
Features: 1. Equipment throughout the heating steam heating system as uniform flow of feed solution for the film-type evaporation, and therefore have a high heat transfer efficiency and shorter heating time, the main features. Heat pumps, such as re-configuration, more energy saving, low consumption of steam, cooling water volume is low. 
 2. Material along the canal wall down the flow of accelerated evaporation pressure, viscosity of the feed solution to adapt to evaporation. 
 3. As the material into the root canal of each membranous evaporation, liquid heating time is very short, so evaporation of food in particular is extremely favorable for the preservation of large food nutrients. 
 4. Evaporation process under vacuum, not only guarantee the material health requirements, while ensuring environmental protection requirements, while significantly reducing the evaporation temperature, with hot pump configuration, the second part of the re-inhalation of steam by the hot pump and Health steam mixture, which saves raw steam, and because of steam through the hot pump heat into the shell was spray fog, steam fast diffusion, liquid heat moderate, so heat-sensitive materials for enrichment. 
 5. Device is suitable for foaming material evaporation, due to feed liquid into a membranous tube in the heating evaporation, or the formation of vapor-liquid separation, while the bottom of the effector, the majority of Jibei away the feed solution, only a small part of the material liquid and vapor into the separator all the secondary enhanced separation, liquid whole process does not form too great a shock, to avoid bubble formation. 
 6. Evaporation and concentration of food, equipment may also have bacteria, the material first preheated, then enter the sterilizer to reach 94 degrees, maintain 24 seconds or so, that effect into the effect of a body, the material quickly flash, the temperature dropped instantly . 
 7 devices can be equipped with CIP washing system, to achieve in situ cleaning, the whole device easy to operate, no dead ends. 
 8. Equipment continuous access to feed. 
 9. Equipment automation systems can be configured to achieve feeding quantity control, automatic control of heating temperature, the feed concentration control, cleaning control, but also with unexpected power failure, failure of protection of sensitive material. Other security, alarm and other automation and control.