Hot sale! polymer emulsion architectural waterproofing coating for basement/wall/tunnel

(P01)Polymer emulsion architectural waterproof coating

Product description

P01 Polymer emulsion architectural waterproof coating is a new type of waterproof material, which encourages the development of the country. Because of its excellent performance, simple construction, easy to guarantee and long service life, it has been widely used in all kinds of waterproof and seepage control projects.

951 coating is made of VAE and acrylic acid copolymer emulsion. high tensile, excellen elongation and impermeability.P01 waterproof coating is also called 951 waterproof coating, polymer emulsion waterproof coating. It is made by mixture of VAE emulsion and polyacrylic acid emulsion.951 waterproof coating is one of the water based coating. It is high tensile, water-emulsion, cold applied, single compoment waterproofing. When the coaing become membrane after solidified, it form a rubber elastomer with good waterproofing, excellent elongation, high tensile strength, good impermeability,  no toxic, no smell, no corrosivity, and colourful. It can be used one of the alternative of tar type polyurethane coating. This kind of coating can be made all kinds of colour.  And easily apply. It is a kind of waterproof coating with many advantages.

Product characteristics

l 1 water, one component, adjustable color, non-toxic odor free, simple construction, is environmentally friendly polymer waterproof materials.

l 2 brushing film is formed after the overall high elongation and high tensile strength seamless rubber layer, good waterproof effect.

l 3 liquid normal temperature construction without joints, the shape of the structure is complex, the construction site of the flame is not particularly obvious superiority.

l 4 with high solid content, good physical and mechanical properties, good water resistance, good durability, can be exposed to water.

l 5 for toilet bath, water tank, wall waterproofing and repair works best.

l 6 excellent aging resistance, in the ultraviolet, heat, light, oxidation, stable performance, long service life.

Implementation standards

JC/T864-2008

Scope of application

l 1: old and new flat roof sloping roof and gutter cornices, especially for the irregular shape of the part of water seepage.

l 2 floor: toilet, kitchen, pool and wall waterproof finish.

l 3 underground buildings: the external walls, floor, underground tunnels, elevator etc..

l 4 with all kinds of waterproof coating composite waterproof coiled material or use, improve the waterproof effect and durability.

l 5 with SBS waterproof coiled material, waterproof effect of up to 25 years or more.

Construction method

Primary treatment:

The formation of a solid grassroots must clean water, yin and yang angle made arc. The old roof waterproof layer of dust original rupture, the drum of the inter net, indentation damage repair flat, leak proof required first plugging treatment, grass-roots should be smooth, do not have Mingshui. Rainspout orifice, joint special part should be first flexible seal the deal, brushing procedures in general to Yin and yang angle, and vertical plane. Finally, large area construction.

Bottom coating construction:

Mixing water and paint by 1:3 weight ratio, stirring and after use. The base coating can improve the penetration of the coating to the base layer, and strengthen the bond strength.

Paint coating:

Construction using rolling, scraping, brush method can be, should adopt a thin layer of coating method, every time the coating can not be too thick, generally divided into 3-4 times, the total thickness of 1.5-2.0mm. Coating dry film before coating can be applied to the rear side of the coating. Weak links should be paved with carcass reinforcing materials.