self-adhesive bitumen waterproof membrane with Grace quality

FOB Price

USD $1.6 - $1.8 / Square Meter

1000 Square Meters(Min.Order)

Port QINGDAO CHINA
Payment TermsT/T

Request Sample Customized Request Request Free Catalogs

Contact Now

Get lowest price

Product Details

Place of Origin	Shandong, China		Brand Name	JINLONG
Model Number	JLZZ-1.20

Product Description

Self Adhesive Bituminous Roofing Membrane

Description
It is a modified bitumen base sheet consisting of styrene-butadiene-styrene (SBS) compound modified asphalt covering with different upper separated materials, no fiber and underside with silicone antisticking layer. According to different upper surface, it can be three types: HDPE film surfacing (SAM-920PE) and Non-film surfacing (SAM-920N). There have three kinds of thickness: 1.2 mm, 1.5 mm and 2.0 mm.

Where to use
    Swimming pools, fire pools and reservoirs;
    Subways or tunnels;
    Open fires forbidden construction areas;
    SAM-920PE can be used in non exposed roofs and undergrounds;
    SAM-920AL can be used in all kinds of exposed roofs;
    SAM-920N can be used as an auxiliary material or bonding material between two incompatible places.

Advantages
    Self adhesive, safe and environment-friendly;
    Excellent flexibility in low temperature and elongation;
    Strong adaptability for substrate shrinkage, deformation and cracks;
    Strong self healing ability for penetration and cracks;
    Lasting bonding and sealed performance;
    Excellent water resistance.

Packaging

material is packed in rolls with plastic bags.

Storage and Transportation
material should be stored in well-ventilated shade place and protected from sun or rain. The temperature in stored places can not be higher than 50° C. It can not be put in more than two levels. If packed by cartons, it can not be put in more than five levels.

Application System
Yuhong adhesive waterproof system includes substrate, primer, membrane waterproof underlayment, protection layer.
Yuhong also provide a complete line of compatible accessories and components, including primers, pipe clamps, terminal battens and screws.

Surface Preparation
Surfaces should be dry, clean, smooth and free from any dusts, oil or loose particles. Cracks and uneven places need to be filled by polymer mortar.

Membrane laying
After substrate treating agent drying, lay the material according to application designs.

Sealing, fixing and constraining on vertical surfaces
On vertical surfaces, fix with metal battens and seal with sealants for membranes.

Application on protection layer
After membrane laying, apply on protection layer according to waterproof layer design.

Item		Requirement	Test method
Thickness, mm		≥1.0	ASTM D 751
Maximum load, kN/m	Longitudinal	≥4.4	ASTM D 412
	Transverse	≥4.4
Peel strength		1576 N/mm	ASTM D 903
Flexibility temperature		-29 centigrade	ASTM C 836
Tear resistance	Longitudinal	≥89 N	ASTM E 154
	Transverse	≥89 N
Moisture vapor permeance		≤5.7ng/Pa.S.M. 2	ASTM E 96
Sealability around nail		Pass	-
Waterproof integrity after low temperature flexibility		Pass	-
Waterproof integrity of lap seam		Pass	-
Slip resistance		Pass	-

Contact Us

Weifang Jinlong Waterproof Materials Co., Ltd.: Contact nameAngela Lee
Chat Now; Phone86-536-5233345; AddressEconomic Development Zone,Shouguang city,Shandong Pro.,China, Weifang, Shandong

*Email
Please enter Your valid email address.
*To

Angela Lee
*Message
Your inquiry content must be between 20 to 5000 characters.
Please enter a correct verification code.

Product Categories

Anticorrosion Tape	EPDM Waterproof Membrane	New Products	Non-Woven Fabric
Polyester Mat	Polythene Waterproof Membrane	PVC Waterproofing Membrane	SBS Bitumen Waterproof Membrane
Self Adhere Bitumen Membrane	Self Adhesive Flashing Tape	Self Adhesive Waterproof Membrane	Waterproof Coating

self-adhesive bitumen waterproof membrane with Grace quality

You May Like

Product Details

Product Description

Contact Us

Product Categories

New Products

Popular Searches

Recommended Products

Find Similar Products By Category