GCL 200W LED Parking Lot Low Profile Shoebox Area Security Light, ETL-Listed & DLC-Qualfied, Daylight 5000K

GCL 200W LED Parking Lot Low Profile Shoebox Area Security Light, ETL-Listed & DLC-Qualfied, Daylight 5000K

Specifications
* Input Voltage: 100-277VAC, 50/60Hz
* Beam Angle: 90º/120º
* Operating Temperature: -25~50ºC
* Operating Humidity: 95%Rh or below
* Dimensions (LxWxH): 16.8" x 13.5" x 6.9"
* Mounting: Accepts Ø2.5" round mounting pipe
* Compliance: ETL, DLC

Wiring:
* Black to Live/Hot
* White to Neutral
* Green to Ground

Product Advantages

   1 CE & RoHS & ETL & DLC led refrofit lights 24w-300w equivalent General Incandescent,120General Energy-saving lamps.

   2 light-emitting semiconductor chip no filament, no glass bulbs, not afraid of vibration, less breakable, life of up to 50,000 hours (incandescent life of only 1000 hours, regular saving is only 8000 hours lamp life)

   3 Healthy light does not contain ultraviolet and infrared light, does not produce radiation (ordinary light contains ultraviolet and infrared ray)

   4 : no harmful elements such as mercury and xenon, which will help recovery, but does not produce electromagnetic interference (ordinary lamp contains mercury and lead, elements, energy-saving lamps in the electronic ballast will produce electromagnetic interference)

   5 : fever small, 90% of the electrical energy into visible light (incandescent electric energy conversion 80% for the heat,only 20% of the energy into light energy)

   6 the required voltage,current smaller,less heat, not produce security risk, in the mines and other dangerous places. We have provided many specification LED Corn Bulb choices, They are include, E27/E40 corn light ,Horizontal Plug Corn Light, etc.

   7 LED light there are three-core cable of AC power,red cprresponds to the power of "L",blue to "N", and green or yellow to "G".

Installation Caution

1. Make sure the power has been turned off before maintenance.

2. Clean the lens cover regularly to maintain hgih transmission of light.

3. Clean up the dust from the reflector and heat sink regularly to keep sound heat dis-persion

4. Be careful not to use water or corrosive solution for cleaning,preferably with a dry cloth.

5. When install or replace power supply, directly open the back over with a screw-driver,then remove the power supply,There are three-core cable of AC power,red cprresponds to the power of "L",blue to "N", and green or yellow to "G".

  GCL Factory 

Contact info.:

Hannah Luo

Shenzhen GCL Electroncis Co., LTD

Cell/Whatsapp:0086 18565795338

Skype:sailingled03