WF-A1000 Citrus Juicer commercial citrus juicer

The juicer’s crust system of weifeng brand is made of aluminum alloy and was created by advanced technology. The internal conformation is compact and reasonable. They are all made of stainless steel where get in touch with food .The advantage of this production: It can resist decay, not easy to rust and easy to clean. Turning on this machine for several seconds you can get the fresh tasty and delicious syrup .At present it is a satisfying machine for hotel, restaurant and drink shop .All kinds of fresh melon fruit and vegetable can be squeezed .For example: watermelon, cantaloupe, apple, pear, orange, peach, almond, pineapple, grape, carrot, celery and so on .The residue will be separated voluntarily from the syrup. The handle of residue is convenience. The rate of juice gets to 75%. Because the operation is convenience and easy, as soon you use the juicer as you can get the fresh and original syrup and you can choose the fruit and vegetable freely .The syrup is healthy nature and secure .It is the necessary way for the drink’s renewing.

1.Attention to be paid before operation.

A. Power supply of 110v-240v The power supply must have the safety system to connect with the ground. Please don’t replace the machine’s cable by yourself.
B. Check the lid whether lock closely with the bower centering (You can pull the spigot of juice for cask that made of stainless steel if it not move, it’s correct .If it is lax you can readjust the lockpin
C.Connect to the power supply and turn on the machine, examine the machine with your eyes and ears to make sure the function normal before normal work.

2. The process of operation.

Please clean the fruit or vegetable you want to squeeze before squeeze and peel off the husk.(For example :orange, watermelon).Some fruit like peach and apricot they have the firm pip you must take out them or it will shatter machine .Cutting the pulp into piece or block smaller than the size of the ostium for putting the pulp. Then put them into clean container. When turn on the machine you can put the pulp into ostium continuously or use the fruit pusher, then the fresh juice will pour from the ostium  If you want to change fruit or vegetable the machine worked in normally, infusing clean water into ostium it will be cleaned and the peculiar smell will be resisted.

4. After operation

If you want to clean or change the blade and centrifugation basket after you use the machine over. You must turn off the power then you can open the lid and screw the nut, take out the blade, centrifugation basket to clean completely (Don’t move the other parts lest should effect the quality for boot-strap). Finally install the parts with reversed sequence. Putting on the lid then the machine can work normally again.