Economical Semi-automatic powder compact machinec / powder press

Specifications

                        Cosmetic Powder Pressing Machine

Product Features:

¶    This machine is designed for cosmetic powder, apply to powder cake and eye shadow etc.

¶    Convenience to fix moulds and accurancy to fit moulds raise fitting moulds efficiency.

¶    With automatic rolling cloth device which can save pressing mould time and increase production.

¶    To press powder downwards and upwards benenits air penetration and improves cake's appreance.

¶    It ensures operator’s safety that both left and right buttons are pressed at the same time to start machine.

¶    Pressure times and time of keeping preasure can be adjusted in accormdance with operation requirements.

¶    Manual or automatic mode is selected according to operator’s need.

¶    PLC and text display make operation easy.

¶    Removing mould device.

Product Photos:

Target Product:

Specification:

lDimension: 1485*760*1420mm(L*W*H)

lOil Working desk: 1480*680*960mm(L*W*H)

lPower: AC 380V/3P/50Hz

lWorking pressure: 0-150Kg/cm3

lMax pressure: 200kg/cm3

lWeight: 650Kgs

lCapacity: Depend on working speed and program, about 10-15second/mould.

lOil cylinder: 125*100

Equipment principles

1, The machine adopts compressed air control drive, so in a particularly suitabl    e for explosion-proof requirements and used in wet conditions, High security.

2, Due to the startup control, And adopting mechanical positioning, can be different filling cream liquid products ,Precision is ±0.5%

3, Using lead screw, counter, Make filling quantity adjustment accurate, And can directly see the number of the filling quantity.

4, If need stop urgently, just press the abrupt stop switch, The piston automatically retreat back to initial bits,Filling stop.

5, According to the requirements, can adjust it between "manual" and "automatic" filling state.

6, Equipment failure rate is extremely low.

My customers:

After Sales Service 

The above machine which we supply it to you, we can give you one years after sales warranty, we can also send our engineer to you factory to install this equipment and train your staff, but the Buyer should pay the round air ticket cost and arrange the hotel accommodation as well as the means for Seller’s engineer. We will send some free set of spare parts for you change it.

Payment terms: 

30% deposit by T/T before production, 70% balance should be paid by T/T before shipment. but we also accept L/C.

Package: 

Standard wooden Case Packing

Shipment terms: 

We usually take FOB, but we can also accept EXW,CIF,CNF.

We will reply within 9 hours: