Advantages:

This machine prints directly on fabric without heating transfer process. 

It can work continuously for 24 hours without corrugated.

the machine is composed by three parts: 

Printer: 

1.DX7 printhead, fast speed, long lifespan, high precision.          

2.Printing groove designed specilally for fabric printing to collect waste ink and keep fabric clean.

3.HIWIN guide rail,Italian non-slip band, Mimaki press roller etc.  

4.Refillable ink cartridge reduces production cost.

Heater:

1.Ceramic heating tube: Heating fast and well distributed        

2.Front and back stainless steel oscillating axles make the fabric feeding smoothly without drape. Feeding and taking up speed controllable.        

3.Intelligent Temperature control system.(0°C----300°C adjustable) 

4.Discharge slot design helps to keep the heating tube clean and easy to wipe off the oil and dust.

Filter:

1.Exhaust pipes fully discharge the smoke from the tube. 

2.Carbon can be re-inputed easily, it makes the environment odourless and smokeless.

3.Discharge slot is easily to clean.

Our Product Category:
1.Sublimation Flag Printer
2.Textile Belt Printer
3.Coating Machine
4.Eco Solvent Printer
FAQ:
1) What is the speed of Ep-son print head?
Each DX7 head can print appro.16sq.m per hour by 4 pass.
2)What kind of ink should we use?
Sublimation ink:polyester or polyester based blended fabric.
3) How much does the ink cost per square meter?
The ink consumption is 10ml-12ml/sq.m
4) What’s the lifespan of the Print head ?
Each DX7 print head can print at least 50,000sq.m if you operate properly.
5) What's the reason if auto ink filling or print head auto-cleaning can’t work?
A. Print head cap is broken
B. Print head cap is blocking
C. Print head cap is air leakage
6) What’s the reason if the print head is blocking after machine is set aside some time?
A. Print head cap is broken
B. Print head cap is in dislocation
7) What’s the reason if the print head is blocking when printing?
A. Pipeline is air leakage
B. Fluency of the ink is poor(18℃-25℃ is the best)
8) What’s the reason if the engine works at wrong distance?
A. Raster decoder is broken
B. Raster article is dirty,could wipe it by alcohol.
9)Does the fabrics need to special deal ?
Sublimation ink: Pre-coat polyester fabric
10) What about the printer maintenance?
Manual and guidebook will be provided along with the machine.
Any requirements on printer working environment and the surroundings?
Working environment and the surroundings of printer must reach the requirement. (Temperature: 15-35℃, Humidity 40-60%) The surroundings should not have strong magnetic field or equipment that may cause a lot of dust.