slitting line and trim strip line for coil sheet slitter

2, All Accessories use world famous brand 

slitting line and trim strip line for coil sheet slitter

A slitting line, also called slitting line and trim strip, is suitable for unwinding the metal coil into a strip, slitting it into narrower strips of the needed width and recoiling them for sale or the next procedure.

Slitting line can be categorized into thin strip slitting line and thick strip slitting line for the thickness of the strip or copper strip slitting line, silicon steel, stainless steel, aluminum, carbon steel strip slitting line, etc for the material processed.

A slitting line is composed of:

1.Loading coil car  2.Uncoiler  3.Straightener device   4.Pinch roll&leveler & hydraulic shearer   5.Loop pit   6.Side guide   7.Slitter   8.Transition platform & scrap winder   9.Loop pit   10.Tension station   11.Recoiler  12.Unloading coil car

Hereby take as an example a thin strip slitting line used for the uncoiling, slitting and recoiling of cold-rolled carbon steel, hot galvanized steel strip with thickness range of 0.3-3.0mm and width range of 800-1950mm.

Main technical parameter

Material: Cold-rolled, hot-rolled carbon steel, galvanized steel.

Material thickness:0.3-3.0mm

Material width:800-1950mm

Coil I.D.: Φ508mm/Φ610mm

Coil O.D.: ≤Φ2000mm

Coil weight:20 tons max

Narrowest strip width slit into: 25mm (strip thickness≤1mm)

Width cutting precision: ±0.05mm(strip thickness≤1), ±0.1mm(strip thickness>1.5mm)

Slitting Bur: 0.03minimum, 5% of the trip thickness

No. of slitting: 25no.(thickness1mm), 12no.(thickness2mm), 7no.(thickness 3mm)

Line working speed: 150m/min max

Total power: Approx.210kw

The parameters mentioned above will vary even for the same model as the specific requirements differ.

Please contact us for more information to suit your specific need.

Below is part of the models designed by FOT slitting.

In whole container or suitable wooden box package suitable for sea transport

our engineers will go out to buyer's factory for installation and test of the machine, and support for mainteance of the machines in furture time.

We offer 24 hours computer and telex service support, response in 3 hours after customers' requirement.

 Besco started to manufacture press brake, shearing machine, bending machine, power press, hydraulic press and so on metal working machines since 1997 and we export to worldwide market and get good reputation.

Following is the pictures of our factory:

 What is the delivery time?

Answer: Usually in stock, if not, will be finished in 30 days.

What is the payment method?

Answer: 30% down payment and the balance should be paid before shipment.

What certification do you have?

Answer: