AC300 CNG pressure regulator kit CNGLPG Multipoint sequential injection kits

Specifications

Descriptions about CNG conversion kits 
1.High Reliability & Adaptability 
2.Low cost, 
3.high quality 
4. Delivery on time 

Details about CNG conversion kits  

1.System Characteristics:

A.The air-fuel ratio of engine of engine is controlled with closed loop, therefore the exhaust gas emission is low (Euro 3 and Euro 4); And keep engine be more powerful

B.Self-adaptive self-diagnosis and self-learning function, No interference with the OBD system of the vehicle

C.ECU set is suitable for both of LPG & CNG conversions, Optimized Varying Climate Conditions

D.sequential gas injection system working in real time, assures optimum gas into each cylinder

operation with lots of gas injectors well, adjusts opening time of each injector on the rail, Testing of the injectors enabling to diagnose the faulty injectors

F.Takes signals in Real Time in all operating conditions to obtain optimum opening time of each injector.(i.e. gas / water temperatures, manifold depression, rpm, petrol injection.

G.High Reliability & Adaptability and User Friendly

H.Easy Software Installation (Fully Windows Based)-Mapping & Calibration

I.  No Need of OMD Emulators

J. Designed for ultra low emission

K. Save to ECU/Load from ECU/Save to File/Load from File is all possible

L.Pressure Sensor: Automatic switch to the gas when the gas is run out

M.No need cutting off the wires thanks to sockets placed inside the injection connectors

N. Diagnostic strategies are in force to enable automatic switching to gasoline mode should the system detect a fault, Auto fault clearance

O.  It manages full group motorisations, semi-sequential and sequential slave in one single card.

P.  Integrated Powerfully Microprocessors, Water Resistant-Waterproof Aluminums Box 

2.Technical Parameter:

3. Photos of key parts

A.  Reducers

B.Injector Rails(Approved by ECER110),4cly6cly8cly ,all of them  are ok.

C.ECU(AC300)

D.CNG filling Valves

4.Other components of CNG conversion kits:

(sylphon bellows, vacuum tube, water pipe, air pipe used in regulator and injector , air pipe used in injector and air intake branch, rubber sheet, rubber cap,fittings)

5.Warranty conditions: The warranty period terminates minimum 1 year with a mileage limit. IF exceed the warranty period, you need to pay for the cost if you want to apply for warranty service.