High quality CRSS-C common rail diesel injection pump test bench

      High quality CRSS-C common rail diesel injection pump test bench        

CRSS-C common rail injector test bench is based on the diesel engine ECU, also provides control signal of common rail system of Bosch, Denso, Delphi and Siemens etc. (the CP1 /CP2 /CP3/ HP3 /HP4 / DELPHI), drive the high pressure common rail injector to work. The user can set parameters according to their actual situation, and save the data according to the different group, so that the servicemen do the correct judgment and maintain of the working of common rail system.

Products feature

1. Test the high-pressure injection performance of common rail pump.

2. Test low-pressure transfer pumps performance of common rail pump.

3. Test fuel rail pressure sensor performance.

4. Test fuel rail limited pressure relief valve performance.

5. Test fuel rail flux limit device performance.

6. Measurement of the fuel delivery of common-rail injector.

7. Measurement of the reflux delivery of common-rail fuel injector.

8. Test the measurement consistency of common rail injector.

9. Test the degree of atomization of common rail injector.

10. Test the sealing of common rail injector.

11. Motor soft start, frequency-changing and speed-regulation.

12. The oil rail pressure can be set.

13. At the same time drives the work of six injectors.

14. LCD display the testing oil rail pressure in real-time.

15. Various language available, such as Chinese, English.

16. Pulse and freqency of the injector drive signal can be adjusted.

17. The testing of open-loop and close-loop can be controlled from controller.

18. Provide safety protection design, use more safety.

19. There are the database of common rail fuel pump and injector.

The main technical parameters

The oil-collecting tank of the test bench should be supported on the working table and the frame firmly with wooden blocks when packing.

The test bench must be covered with plastic proof and the top cover of the packing case should better be hammered with a layer of oil felt to prevent water or rain.

Avoid violent shock during transportation. Do not let the rope touch bench directly to avoid damaging surface when hoisting after unpacking.

Service Content

1.Provide customers with pre-sale after sale the whole process a full range of services

2.Undertake Gezhongfeibiao, development and design of special equipment, manufacturing.

3.Providing the overall process solutions

4.Product use, maintenance and technical training

5.Technological upgrading of products tracking service

6.Provide dedicated technical advice

7.It offers a variety of spare parts, special tools accessories.

8.It offers a variety of diesel fuel system authentic parts

Pledge

Product quality Three Guarantees year

Providing products and services for life

Focus on key customers set up special service

Ensure quality and timely service

   Founded in 1966, lying at the foot of the famous Mountain  Tai, an important skeleton enterprise being tech-reconstructed in 65, 75, 85 period by the nation, the Taian Taishan Jinshi Machine Co., Ltd(the primary Taian Experimental Equipment Factory) is a member of the gas engine industry union and a Chinese automobile servicing equipment league syndic unit, a nozzle and injection pump  industry syndic unit. Now, the factory has more than 900 workers and covers an area of 100 thousand square meters, which has over 400 producing equipments. It has the ability of produce the machine, electronics, transportation equipment, molding tool. Year to year provides injection pump technology training. It is the largest special manufactory producing gas engines in China.

 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Sales Manager : Frank Zhang

Tel(Whatsapp,WEchat): 0086-13583895953

QQ:1610926861

Address:Middle Part of Chuangye Road, Taishan Qingchun Chuangye Development Zone, Taian City, Shandong, China