flashing LED light for rc car RC Car Accessories 12-LED Flashing Light System for RC Car

flashing LED light for rc car RC Car Accessories 12-LED Flashing Light System for RC Car

Content :

1.car led *12pcs   2.car led hoder*12pcs   ntol box*1pcs       4.power connection  ntrol connection   6.accessories parcel

Specification

1.input votage:4.8v-6.0v    ing current:100mA   3.dimension:47*30*12mm   4.led wire:35cm   ntrol wie:28cm

      6.power core connection wire:20cm

Set  up

1.choose a car body and install the LED holder in the car body in the car body

2.Put the LED into the LED holder

3.Connect each Led with the plug in the corresponding control box based on the instruction.

4.Stick the main control box on the top of car body property

5.Mount the car LED wire abd avoid the interference of the wheel's turn or spin

6.Fix all the wires and check whether they are set correctly

*LEDcould be installed flexiably,according to your perference.

Modes:

After plug in,enter the car mode,press control butto "set" to enter the following 4 mdese

1.all car LED is on

2.For the front LED,the white light is flashing quickly,the blue light is always on,for the black Led,the white led is always on,the Yellow and Red lights are flashing quickly

3.for the front LED,the white and blue lights are flashing in the highest spped frequency as well

4.  for the front LED,the white LED is always on,the Yellow LED is flashing slowly.For the black car LED,the white and yellow lights are flashing at the same time,and thty are flashing with red LED alternmatively.