The Most Authoritative Manufacturer in China CRIS-1 High Pressure Common Rail Fuel Injection Pump Test Bench

The Most Authoritative Manufacturer in China CRIS-1 High Pressure Common Rail Fuel Injection Pump Test Bench

CRIS-1 high pressure common rail injector test bench is based on the diesel engine ECU, also provides control signal of common rail system of Bosch, Denso, Delphi and Siemens etc. (the CP1 /CP2 /CP3/ HP3 /HP4 / DELPHI), drive the high pressure common rail injector to work. The user can set parameters according to their actual situation, and save the data according to the different group, so that the servicemen do the correct judgment and maintain of the working of common rail system.

Products features

1. Support high-speed solenoid valve type common rail injector, and support the third generation of high pressure common rail piezoelectric crystal common rail injector

2. Support various rail pressure sensor

3. Hardware and software both the short circuit protection, machine more reliable configuration

4. Motor soft start, stepless speed regulation

5. rovide special fixture of testing injector

6. Set the injector drive letter pulse width and frequency

7. Set scale valve driving signal dutyfactor setting

8. Setting rail pressure and open/closed-loop control

9. Measurement of the fuel delivery of common-rail injector

10. Measurement of the reflux delivery of common-rail fuel injector

11. Testing the opening pressure and the degree of atomization of common-rail injector

12. Test the cranking oil quantity of common rail injector

13. Test the sealing of injector

14. Ultrasonic cleaning of the common rail injector

15. Various linguistic choice, Chinese/English/Russian

16. Safety design, prevent operators, use more safety

The Most Authoritative Manufacturer in China CRIS-1 High Pressure Common Rail Fuel Injection Pump Test Bench

Your Best Choice !!