Singapore,27W 5ft 1500mm UL&DLC G13 T8 LED Light,Rotatable,Aluminum+PC,One end voltage, UL&DLC G13 T8 LED Lamp,5Years Warranty

Product name: 27W 5ft Rotatable G13 T8 LED Light,UL/CUL/DLC, Aluminum+PC, One end voltage, G13 T8 LED Lamp,5Years Warranty

  light distributor

test report

Wiring instruction:

1. The Graphic Illustration for the Exchange of Inductive Ballast LED Tube

  (1) Switch off the power before installation

  (2) Take down the starter

  (3) Replace the traditional lamp with LED tube

2. The best energy-saving case

  (1) Switch off the power before installation

  (2) Take down the starter

  (3) Connected A and B of the inductive ballast, A and B form a short circuit, connecting to a terminal. Or take down the ballast.

Packing

Attentions:

1. The working voltage is AC100-277V.  Pls ensure the voltage when connected the power supply. The light would be destroyed permanently if connected with higher voltage.

2. After connecting with the power supply, no contact between the relative metal and the light base to prevent electric shock.

3. After unwrapping the package or before using it, pls check whether it is destroyed due to transportation. If there is any damage, pls stop using it to inform supplier. The product only could be used under intact conditions.

4. To ensure the product could be used normally, pls strictly follow the introduction and attention. The supplier shall not be responsible due to any of the damage caused by illegal operation.

5. Pls don’t connect the LED tube and power supply in the high temperature condition. The lifespan would be shorted when it is employed under the higher temperature. It is recommended that the product should be used in room temperature.

6. Before installing, pls ensure the environment is suitable and it is recommended that it should be installed on stable place in case of vibration.

7. Due to the temperature of the lamp’s surface could reach to 50℃, it is recommended that there is no devices which is sensitive to heat. To ensure the suitable working temperature, pls keep it from heat resources and be used in moderate environment.

Q: How to get warranty?

A: Send us email to explain problem with pictures including application, based on correct usage, we send new lamps for replacement free of charge,  shipping cost by us within first year or by clients since 2nd years.

Q: OEM design for packaging acceptable?

A: Yes, MOQ is 200pcs per order.

Q: What is MOQ?

A: 4pcs, because standard packing is 4pcs per carton.

Q: Sample policy?

A: clients need to pay for samples and shipping costs.

Q; Payment term?

A: For samples(<USD5000): By bank transfer or Western Union, 100% deposit.

   For order(USD5000-20,000): By bank transfer, 30% deposit and balance before shipment.

   For order(>USD20,000), 30% deposit by bank transfer, and balance by bank transfer or by LC at sight.

Q: How to be our distributor?

A: Any clients can act as our distributor if yearly purchase amount can reach USD100000.

Q: How to order?

A: Please tell us our model numbers, lamp power, input voltage, order quantity, shipping methods(by sea, by air or by express) and your company contact information.