Singapore,26W, IP44, 15inch Dia395mm,Radar LED Ceiling,Built-in Moving detector,Flush Mount Microwave radar led ceiling light

Product Name:  Singapore, IP44, 15inch Dia395mm,26W Radar LED Ceiling Lite with Built-in Moving detector, Flush Mount Microwave radar led ceiling light

Model:  ILT- CH04-26W

---Different body color for 26W Flush Mount Microwave radar led ceiling light

Main features:

• Good waterproof and dustproof performance. The double design of waterproof and dustproof circle has a good effect to prevent water, dust and mosquito.

• Super bright SMD5630 LED as lighting sources. High efficiency, energy-saving, eco-friendly.

• Side-emitting design to form a surface emitting effect.

• Spinning aluminum housing in silver-grey color, simple and nice.

• Integrated heat dispersion structure. lower degradation and long life span.

• Built-in wide voltage (100-240V) and constant current input. Be applicable worldwide.

• No strobe. With soft light. No harm to human eyes.

• Surface mounted. Easy for installation and maintenance.

• Built-in motion sensor for emergency function. More intelligently. Conveniently and energy-saving.

---Inside view of design for 26W Flush Mount Microwave radar led ceiling light

Specifications:

Body color: White, Bronze or Satin finish for option

Waterproof: IP44

Driver: Built-in

Sensor detector: Built-in

LED Chips: 0.5W each, SMD5630, By San’an, placed in the edge of the plate

Color rendering index: >80Ra

Material: Aluminum body + PMMA cover

Beam angle: 120degree

Power Factor: PF>0.9 

Color temperature: WW:2800-3300K,NW:4000-4500K, CW:6000-6500K

Input Voltage: 100-240V

Ambient temperature: -20 to 40 degrees Celsius.

Warranty: 5Years

Function description:

    This product is a light with human induction function. When people come within the sensor scope, LED ceiling light will turn on automatically, it will turn off after a while (setting available) when people leave. The built-in microwave sensor also has the photosensitive function. Which can help turn off the light when there is enough lighting (brightness above 50lux).

 --- Sensor induction explain of 26W Flush Mount Microwave radar led ceiling light

Sensor induction range chart

---Sensor induction range chart of 26W Flush Mount Microwave radar led ceiling light

Technology parameters:

Microwave sensor description:

A:Microwave sensor function instruction

--- Microwave sensor function instruction of 26W Flush Mount Microwave radar led ceiling light

B: Setup instructions for each corresponding function of microwave sensor 

 1. sensing area setting

Setting the controller's detection zone agilely through the dip switch for different applications.

2. Lag time setting

Setting the lag time of lighting through the dip switch when people leave.

3. Day and night threshold setting

Setting the brightness value in day and night agilely through dip switch. Unit: lux

Warm tips:

Factory default settings for the ceiling light:

Delay 30 seconds, the light will not turn on when luminance above 30lux. But it can be set with your requirements according to the instruction of Microwave sensor function. 

Installation steps: