Most popular 18650 battery spot welding machine, Factory Cheap portable spot welding machine 110V / 220V on SALES

  Alibaba Most popular 18650 battery spot welding machine, Factory Cheap portable spot welding machine 110V / 220V on SALES

 Mingda spot welder  , professional  spot welder 

Mingda battery cell spot welder , hIgh precison battery cell spot welder 

Mingda battery cell spot welder , your best choice

Technical Specification of MINGDA battery pack welding machine

Detail of  MINGDA spot welding machine

MD series Spot Welder Machine battery assembly welding power source is used the latest welding technology "polarity switching" welding way, so far it is the advanced level high performance inverter resistance welding machine, it is special designed for the production of high-end mobile phone batteries, power battery, digital battery, mobile power battery, nickel metal hydride, nickel cadmium cell.

MINGDA MD series spot welding machine

MD-300(220V/110V): Welding thickness:0.01-0.3mm

MD-2005(220V/110V): Welding thickness:0.01-0.25mm

MD-1001(220V): Welding thickness:0.01-0.12mm
MD-1001A(110V): Welding thickness:0.01-0.12mm

Feature of  MINGDA battery spot welding machine

1.High speed and high precision micro processor (MCU) control, provide highly stable repeat welding.

2.High speed welding: quick start with high speed polarity switch reduces the temperature effect so that keep the welding surface clean and beauty. 

3.Polarity switching: inhibition asymmetric effect makes the two point weld strength uniform and extend the electrode life.

4.DC output: welding current is pulsating direct current (waveness is small), no AC zero discontinuous heating workpiece shortcomings, heat concentration and improve the welding thermal efficiency, it is especially suitable for welding the non-ferrous metal materials and some difficult welding materials, welding process is stable, welding quality improved significantly. At the same time, the electrode life get extended.

5.Fast response. Power on time control cycle is 1 ms , 20 times than 20ms of common AC battery welder

6.Blue 19264 LCD screen display, graphical display the current working status, friendly working interface, welding pulse graphic display function to improve the convenience debugging observation.

7.Compatible with mechanical and pneumatic welding head.

8.Double pulse reduce welding spatter, effectively improve the welding quality.

9.Two different welding methods (1) general spot welding; (2) continuous welding.

10.The built-in welding counter, can do all its solder joints.

11.Data storage using EEPROM, no battery life problem, each operation  all returned to welding procedure of the last use .

12.Compatible have welding pressure switch of the welding head and no welding pressure switch of the welding head.

13. Preloading time and holding pressure time from 0 to 2.55 seconds continuous adjustable.

14. Discharge switch can use mechanical or photoelectric switch. 

Payment Terms of  MINGDA  battery spot welding machine

Delivery Details of  MINGDA  battery spot welding machine

Insurance: we can buy insurance if customer suggest it

Package and sapre parts of  MINGDA battery pack welding machine

A. Height adjustment of Welding needles : loosing the height adjustment screw with a
wrench. Then adjust or replace the length of needles exposed below the electrode(usually, it
is about 15mm. It is easy to deform if it is too long) finally, tightening the screws
B. width adjustment of Electrode (needles) : loosing the width adjusting screw with a
wrench, then adjust two electrodes so that two needles to appropriate distance. Last,
tightening the screws.
C.Test: test whether there is coke on the needles or not., if so. you need to clear it with a
file or abrasive paper. then using the right foot press pedals . When its head drop, stare the
welding needles until the needle is on the welding point
D. Power: put plug into a 220V power socket, and turn on the power switch, indicator
flashing, the welder is work. If working indicator does not shine or shine without flashing.
turning off the power then turn on again.
E. In order to ensure good quality of welding, you should often adjust needles and keep it in
a good condition.  

Application of  MINGDA battery pack welding machine

Workshop of  MINGDA battery pack welding machine

 FAQ

Alibaba hotsales 18650 battery spot welding machine, high precision MD-1001portable spot welding machine 110V / 220V on SALES

Dear friend:  If you are interested in MINGDA MD series spot welder,please feel free to contact with me. Your feenback is a great encouragement for us, all MINGDA staff will try our best to support you.

MD-300(220V/110V): Welding thickness:0.01-0.3mm

MD-2005(220V/110V): Welding thickness:0.01-0.25mm

MD-1001(220V): Welding thickness:0.01-0.12mm
MD-1001A(110V): Welding thickness:0.01-0.12mm