Accurate positioning detector metal golden metal detector MD-6150

1. Mode—Indicates which of the three detection modes is selected by
          highlighting the corresponding word on the LCD screen.
2. Target ID Legend—A printed Target ID Legend is located directly above the
          LCD screen and indicates commonly found targets and metals. When a target
          is detected, the Target ID cursor will appear below the word that most likely
          indicates the type of target found, based on its conductivity.
3. Upper Scale—The Upper Scale, where the Target ID cursor is illuminated
          when a target is detected, consists of five (5) graphical segments.

4. Target ID Cursor—The Target ID cursor is illuminated in the Upper Scale
          and indicates the probable identity of a detected target.
5. Lower Scale—The lower horizontal scale, or Notch Discrimination Scale,
          indicates the discrimination pattern where the detector will or will not
          produce an audible signal when a target is located. This scale changes when
          switching between Detection Modes.
6. Coin Depth—The depth of a coin, or similar sized target, will be shown on
          the LCD screen. Depth is indicated when the LCD scale is illuminated at “2”,
         “4” or 6+ inches.

7. Tone ID—The Tone ID feature produces distinct audible tones based on a
         target’s conductivity.

: