prefabricated concrete components production line

Product Application

1) Total length: no less than 150m
2) Total width: 21m-24m
3) Traveling crane height: greater than 9m
4) Steel structural workshop with harden ground

Machine Parts

Name:Formwork Pallet

Standard mould size(W*L): 3500mm*9000mm

Our formwork pallet are made with a welded steel profile construction with the forming area that is ground smooth. 

The formwork pallets are transported lengthways through the pallet circuit via the guide pulley. 

Thickness of surface plate 10mm

Bearing Capacity（kg/m2） 500/650

Cleaning Machine

Clean work spaces on the mobile pallet are a decisive quality factor for the production of precast concrete parts.

Machine Parts

Name: Concrete Spreader/Distributor
A smart concrete spreader or distributor in a bridge design provides for a homogeneous discharge of the concrete in the precast plant.

Machine Parts

Name: Vibration Table
The low-frequency vibration table guarantees high quality concrete compaction without concrete segregation in the vicinity of the reinforcement.

Machine Parts

Name: Tilting Table

In the tilting table,  it is possible to vertically remove the precast concrete elements through hydraulically operated tilting devices that usually place the casing at a tilting angle of 80°-85°.

Polishing Machine

One of the highlights is the particularly space-saving smoothing platform, which provides for outstanding surface qualities.

Machine Parts

Name: Curing Chamber

    The pallet is transported via the storage and retrieval machine to the curing chamber.

    The curing chamber area should ideally be enclosed with insulating panels.

    Heating systems control the room temperature and air humidity in the curing chamber. Depending on the situation, different types of heating systems are used (warm air, steam, convection, etc.).