Innovative Magnetic system Rapid Display, Magnetic Base, Adhesive Magnetic Sheet

1, Wall-Mag: one kind of flexible magnet with adhesive, once installed, lifetime use

Magnetic adsorption principle, matches with the Magnet receptive(Ez-Steel) to make the POP with non-demagnetizatin, does not rust.

Thickness: 0.5mm/0.7mm

Width: 0.6m

Length: 20m/30m per roll

Clik here for more details

2, Ez-Steel: high quality ferrous coated magnetic printing film(PP/PVC/PET). One post, few seconds

Magnetic adsorption principle, can be adsorbed in the magnetic board(Wall-Mag), no demagnetization, does not rust

Surface film: PP/PET/PVC

Thickness: 170-220micron

Ink: Water-based----Dye ink

         Eco-based----- Eco-solvent, solvent

         Other---- UV and Latex

Width: 0.914/1.27/1.52M

Length: 30m/50m per roll

Better printing perfomance, suitable for varies of ptinters and inks, with better ink adhesion, high color saturation and moderate cost.

3, Ino-Mag: a printable PP/PVC/PET surface with magnetic film. Thinnest, Widest, Printable magnet

Standard energy magnets-printable, we make many kinds of different printing material laminated on magnets. These materials include PVC, PP, PET, photo paper and coated paper etc. 

Surface film: PP/PET/PVC
Thickness: 170-220micron
Ink: Water-base----Dye ink
         Eco-base----- Eco-solvent, solvent
         Other---- UV and Latex
Width: 0.914/1.27/1.52M
Length: 30m/50m per roll

It is suitable for  wide print prodesses, such as digital inkjet print for UV curable, eco-solvent, water-base, HP Latex, laser print of HP Indigo and TONER, offset print, flexo and label print, screen print, etc.

Clik here for more details

4, Standard Energy Magnets-Plain Brown, magnets with one side and the other side weak or non-magnetized after through magnetizing.

The weak side is for laminated PVC, PP or paper, the magnetized side is for work with magnetic receptive material, such as iron board.

Color: Brown

Thickness: 0.3mm/0.5mm

Width: 0.6/0.62/0.7/1.2/1.27/1.37/1.52M

Length: 20/30 meter per roll

Clik here for more details

Application Scenarios

Background wall display POP

Middle size wall decoration POP

Cylinder POP

Installtion 1 (non-metallic surface)

Step 1, install wall-mag on the wall or board (any smooth surface)
Step 2, stick the printed ez-steel (magnet receptive) graphic on wall-mag.

Installtion 2 (metallic surface)

Method 1: directly print your graphic in Ino-Mag, and directly stick on the metallic surface.

Method 2: install energy-mag on the metallic surface, then stick the printed ez-steel graphic on energy-mag.

Company profile

Gateway Technology Industry Co., Ltd established in 1997 with more than 17 years experience in manufacturing indoor and outdoor media advertising materials, our main products are pvc vinyl, flex banner, pp paper, photo paper, and cold lamination film with different textures.

Our factory is located in Dongguan city (near shenzhen) and Chuzhou city (near shanghai) with the area of more than 50000 square meters, and we have coorperated with amny big brand till now and our products sell all over the world. OEM service is available, welcome to enquire and come to our factory for further evaluation.