China Good Quality Wedge Anchor With Zinc Plated

China Good Quality Wedge Anchor with Zinc Plated

Technical Data

Product Description

The wedge anchor consists of two pieces permanently preassembled into a single unit.

The carbon steel rod is threaded for a portion of its length.

The extreme end of the threaded portion is rounded to protect the threads from damage while the anchor is being driven into the hole drilled in the concrete.

The other end of the rod has a necked down diameter, which runs for a short distance, at the end of which it tapers outwardly to the full diameter of the rod.

A precision formed universal clip made of carbon steel is permanently assembled around the necked down diameter to complete the anchor.

Each package contains the correct number of nuts and washers.

Base Material

Cracked Concrete

Uncracked Concrete

Steel structure

Rilings

Cntilever Backet

Ecalator

Crtain wall

Dors and Wndows

Mchanical Euipment

Cble Tay

Woden Sructure

Installation Instructions

1. Drill a hole in the concrete using a hammer drill and a carbide tipped masonry drill bit conforming to ANSI B94, 12-77,the same diameter as the wedge anchor. If the fixture being fastened is in place and being used as a template to locate the hole for the anchor, the mounting hole in the fixture should afford clearance for the universal wedge clip on the stud.

2. Clear the hole of all debris

3. Place the wedge anchor through the hole in the fixture or directly into the concrete, and hammer it in to the drilled hole, ensuring that they are installed to the desired depth.

4. Turn the nut by hand until the unit is "snugged up". Tighten the nut with a torque wrench to ensure they are tightened to the required torque value.

Product Advantages

1. ISO9001:2000 Certified ,CE, GS

2. Quality Control inspection Before Shipment

3. Appearance:  Bright neat body, without any burrs

4. Tolerances:  Precision Tolerances to Customer Specification

5. Non-standard/ OEM/ODM/customized service provided

6.The longer thread interval makes a variety of thickness of anchorage possible

7. Electro-galvanizing offers maximum bearing capacity in non-cracking concrete, making full use of the intension of substrate

8. Flexible, can be used on the smaller surface or close to the edge

9. When the diameter of anchor is 8mm to 16mm or meeting steel bar during the installation, the depth of drilling hole can be decreased

10. Anti-seismic, anti-aging, high-temperature resistance, weather resistance, resistance to fracture

Specifications Model

A.  MM

B.  I NCH

** Tabulated load values are for anchors installed in concrete(Concrete C20/25). Concrete compressive strength must be at the specified minimum at the time of installation.