24v Swamped Lead Right Angle 90c Heating Cartridge With Ground Wire

Cartridge heaters is consist of a cylindrical stainless steel tube and thus provide a high corrosion prevention. The heating wire inside which is wound onto a ceramic core. The number of coils varies depending on the power. and provide a great uniform distribution of heat, which considerably increases the long life of the heater as well as prevents the oxidation of the heater wire even at high temperatures .The solids, liquids, and gases need to be heated by cartridge heater, transmit heat quickly by conduction if the producer of the heat (the cartridge) is in direct contact with the heat sink (any solid, liquid, or gas). Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc they are also commonly found in the chemical, electronics, medical equipment, packing and nuclear industries.Apart from our broad standard range we also develop and manufacture cartridge heaters according to your special demands.

Cartridge Heater Technical Detail:

• Tube diameter: Φ3mm-Φ30mm
• Tube Material:SS304;SS316,SS321,NICOLOY800 etc.
• Insulation Material:High-purity Mgo
• Reisistance wire element:Ni-Cr or FeCr
• Wattage density: high/middle/low(5-25w/cm2)
• Lead Connection Option: Crimped or Swaged leads
• Lead wire type: 10" Standard(Teflon/silicone high temperature frberglass)

Mini cartridge Heaters:

3x25mm  24v/20w;

4x15.8mm,24V/25W

6x20mm,12v/25w;24v/25w

Cartridge Heaters Photos: