Advanced technology high quality clay brick making production line

Specifications

Advanced technology high quality clay brick making production line

Lantian Mechanical Plant brick

Lantian Mechanical Plant was founded in 1980s. It has been a professional clay brick making production

line making plant for over 30 years. Our clay brick making production line includes automatic feeder, roller

crusher, clay brick making machine, brick cutter, brick stacker, belt conveyor, mixer, kiln car, etc. and our

engineer also can install the clay brick making production line for you, and about the kiln, we will guide you

to build it.(clay brick making production line)

The whole process of clay brick making production line

Clay brick making production line includes box feeder→ Roller crusher/ Jaw crusher→Double shaft mixer

→Finess crusher→ Extrudering mixer → Clay brick making machine→ Brick slitter→ Brick cutter→Brick 

Stacker→Kiln Car→ Kiln.(clay brick making production line)

1. Raw material & fuel preparation and handling

 1)Send your raw material(stone dust, clay, slag, etc.) to box feeder with loader.  Then through automatic feeder,

raw material being send to roller crusher for preliminary crushing .

 2)Preliminary crushed material is conveyed to double-shaft mixing machine for adding water and agitating

through belt conveyer. 

 3)After mixing of the first working procedure, the raw material is again sent to intense agitation extruder

and high speed fine pulverizing double roll grinder for supplement water and agitating the raw material. 

(clay brick making production line)

 2. Molding

1)The molding water content rate should be controlled within 16%-18%. 

2)The vacuum pump will take out the air that entered into the extruding machine together with pug. The

full automatic clay brick machine will extrude the pug from machine mouth and then, carry out slitting &

parting according to the required dimension.(clay brick making production line)

3 Cutting and placing process

1) Using brick cutter to cut brick log into small bricks.

2) Using brick stacker to place bricks on the kiln car. (clay brick making production line)

4) Drying

1)When the unfired bricks cut by cutter and arranged into groups. 

2) The drying chamber work system has heating system, regulating system and moisture excluding system.

The drying quality is controlled by regulating system. And there are two kinds kilns for your reference: If you 

want to save place, manual power, and want to more automatic, tunnel kiln is a good choice for you; If you

want save money, soil kiln is a good choice.(clay brick making production line)

 5. Burning

1)After drying , the unfired bricks are sent onto  kiln by the dried brick cart,stacking bricks onto the kiln car 

for burning. 

2)unloading system The properly burned bricks.(clay brick making production line)

What's clay brick making production line?

Clay brick making production line is suitable for shale, coal gangue, clay and other raw materials to produce 

all kinds of hollow brick, standard clay brick. Clay brick making production line addopts upper and lower 

structure. The upper and lower transmission adopts ZQ type national standard reducer, the axial pneumatic 

clutch, and the whole engine is totally welded by steel plate. The surface of the rimer uses wear-resisting 

material spray welding process to prolong its service time. (ckay brick making production line)

Clay brick making production line show

1) Automatic feeder(clay brick making production line)

2) Roller crusher(clay brick making production line)

3) Double-shaft mixer(clay brick making production line)

4) Clay brick making machine (clay brick making production line)

5) Brick cutter(clay brick making production line)

6) Brick stacker(clay brick making production line)

Different sizes and shapes bricks made by clay brick making production line

(Our clay brick making production line can produce different shapes and sizes clay bricks

according to customer's demands)

Main parameter of clay brick making production line

Installation of clay brick making production line

1) Clay brick making production line should be installed in a horizontal concrete, fixed by foundation bolt.

2) Clay brick making production line's main body should be located vertically with ground.

3) After all the machines of clay brick making production line being installed, we should check each part, 

each bolt, host storehouse door to see whether ther are tight or not.

4) Confirming the power and control switch according to press mud  and its assistant machine's power.

5) Check finished, we should have a empty load test first. If the test is ok, we can make normal production.

Work site of clay brick making production line show:

 How to choose the most suitable clay brick making production line for you?

1) At first, I need to know your raw material. 

2) Second, I need to know the brick size, shape.

3) Third, I need to know how many pieces your will make per hour or per day.

4) Fourth, what/s your bricks' application?(clay brick making production line)

Delivery site of clay brick making production line

Visitors came to see our clay brick making production line work site

Contact: