Plastic drip irrigation pipe

Specifications

Hello,welcome to our webside.

We areacknowlege for the fabrication of  plastic and rubber products.We can supply production as per customer requirement.Mould subjected to your sample/drawing could be done by ourselves.We supply seals and other injection product as well.

Here pls find characteristics of our Technical parameters

1.diameter:16mm
working pressure:0.1-0.2Mpa
thickness:0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm,1.0mm, 1.1mm, 1.2mm, 1.3mm, 1.4mm
flow rate:1-4L/h
space between dripper:set according to customers requirement
2.diameter:12mm
working pressure:0.1Mpa
thickness: 0.6mm, 0.7mm, 0.8mm
flow rate:1.5-3L/h

space between dripper:set according to customers requirement

features

Dripping homogeneous:dripper is made by imported mold and raw materials, the design of flow path is reasonable which ensures the steady flow rate and long paving length .

Dropper is not easy to plug:due to wide flow path of dripepr, the small grain in the dripper can be push out quickly thus increasing the anti-clogging function.
long service life:  the reasonable ratio of raw materials and ageing resistant thus increase the service life

Emitter bonding closely with the wall: the dripper is inserted in the pipe, the outside of pipe is smooth thus dripper will not be destroyed or take off during moving and paving
Emitter spacing arbitrarily set according to user needs
use:
Our products are widely used in greenhouses, fruit trees, cotton, tobacco, tea and urban landscape irrigation and other fields as below 

Plasitic irrigation pipe

For further information,pls feel free to contact us.We will have a quatation upon receipt of your requirement dtails.

Look forward to establishing long term business relations with you.

Thanks for your time.