Antenna Manufacturer 1920-2170MHz 16dBi heavy-duty extruded anodized Aluminum high gain 3g Yagi Antenna

Antenna Installation Instructions:

Please follow these steps: mount the antenna onto the pole, and adjust the inclination of the antenna to the proper position, then fasten the screw to the screw nut. The final structure is just like the picture above.

1. There should be at least three meters between the ground or floor and the antenna above. No huge building,big metal object or any other obstacle or shelter nearby.

2. Put the clamp plate,the flat washer,the spring washer and screw nuts successively on the holes on the antenna, then place the short screw bolt through the holes to fasten the clamp plate to the antenna. Twist the nuts tightly.

3. Place the M6 U-shape screw through the pole whose outer diameter is 35 ~ 50mm and the clamp plate. Then put on the screw nuts and twist them.

4. Adjust the inclination of the antenna to the proper position to receive the best signal by switching the holes on the clamp plate. Then seal all the connections and twist all the nuts tightly.

P.S.:

I have a weak signal in the area I live and want to increase signal strength to improve download speeds. What antenna should I use?

To find the best solution to increase throughput and signal speed with an antenna several dimensions should be considered.

(1)Indoor / outdoor:

---If you can mount it, a suitable outdoor antenna can deliver much better performance.

(2)Directional (panel, Yagi, LPDA) or omnidirectional antenna:

---If you are in a remote area where the direction of the next base station can be clearly identified, it is best to use a directional antenna and align it with the base station.

----If you are in an (urban) area where there are different signal sources and/or you are working with different providers an omnidirectional antenna offers the better and more flexible solution.

(3)High or low gain:

---In general – the higher the gain the better. But gain correlates with size of an antenna so typically there are limits. Further, if you are in an area with very strong signal strengths, a lower gain antenna may work better.

(4)What about all the other antenna characteristics?

---VSWR (to be amended) Patterns (to be amended).

What is a Yagi Antenna?

A Yagi Antenna, or Yagi-Uda antenna, is named for its inventors Shintaro Uda and Hidetsugu Yagi of Japan. A Yagi antenna is a directional type antenna with a single dipole, a reflector, and multiple elements. Yagi antennas can be used for point to point or point to multi-point WiFi applications. Ameison offers NON-Radome enclosed Yagi antennas, as well as dual polarized and Log Periodic Yagi antennas. Additionally, our Yagi-Uda antennas support frequencies from 88 MHz to 5.8 GHz. Custom Yagi antennas are also available.

This high gain wideband directional antenna covers all international cellular, mobile and wireless data bands including GSM 900/GSM1800/UMTS/LTE bands as well as extended cellular and WiMAX bands such as European/USA “Digital Dividend bands” and 2.3-2.7GHz licensed and unlicensed data bands. Its configuration is suitable for various wireless communications systems. 

Ameison Antennas Factory Infos:

Established in 2009 Ameison manufactures a wide variety of OEM and ODM antennas including: LTE, WIMAX, Wi-Fi, 3G, DECT, WLAN, CDMA, GPRS,CMMB, DMB, GSM and DVB-T tyes etc.(our products arrange cover the frequency from 88 MHz to 5.8 GHz.)