Quality 11to 16 Ton mini excavator hydrolic hammer parts

BLTB-100T breakers for 11-16 Ton excavator

hydrolic hammer parts advantages

1. Strict procedure quality supervising, test each product before shipment.

2. Certified by CE and ISO9001:2008.

3. Self-research for most spare parts.

4. OEM is accepted.

5. Reasonable price with fine quality.

BLTB-100T hydrolic hammer parts show

(1) 12 months or (1500 hrs):  Cylinder,Piston,Valve, Back head *

(2) 06 months or (1000 hrs):  Front head *

(3) 03 months or (500 hrs):    Front bush, Brackets *

(4) 01 month or (100 hrs):     Chisel Pin, Accumulator *

Note: All the warranty covered from Invoice Date/ Hrs which ever is earlier and must for proper maintenance only.

hydrolic hammer parts is packed in vacuum packing and wooden packing

Our hydrolic hammer parts  (hydraulic breaker)  are currently exported to North and South America, Europe, Middle East and South East Asia. Such as India, Gothenburg, Turkey, Mauritius, Malaysia and so on. 

Trade Show

Quality Control

Attention in using hydrolic hammer parts -- hydraulic hammer!!

1.Do not lift things with the hydrolic hammer parts -- hydraulic hammer. Lifting materials by hanging wire in the bracket or the chisel not only causes damage to the breaker but also is very dangerous when operating

2.On a hard and large rock, start breaking at an edge.Even a hard and big rock can be relatively easily broken when new hydrolic hammer parts begins at a crack or an edge

3.Do not allow the hydrolic hammer parts to fall to hydrolic hammer parts to breaker a rock. Dropping the hydrolic hammer parts onto a rock will apply excessive force to hydrolic hammer parts or the base machine, causing damage to many parts of the breaker and the base machine.