Automatic pre-made bag granular packing machine food packaging machine

   Automatic pre-made bag granular packing machine food packaging machine

BAG LOADING

The process starts with up to 300 empty pouches

being placed into the adjustable cartridge. Bags

can be loaded while the machine is in operation

BAG DETECTION

Multiple bag detection switches are used at various points in the cycle to ensure correct bag placement and full bag opening.

Should a reject bag be detected it is ejected from the machine and the process continues. Rejected bags can be inspected by the

operator and re-used if good.

BAG OPENINHG

Pouches are individually removed from the cartridge with a unique combination of vacuum and pneumatic actuators. They are

rotated to the fill area and opened.

TRANSITION CHUTE

doubling as a timing bucket. product enters the transition chute while the bag is being opened below. Upon pouch detection the

chute enters the bag and opens its gate. Product is dispensed immediately, without spillage and protecting the seal from

contamination. Difficult product that easily bridges is dispensed into the pouch directly from the filler, through the "open-gate''

FILLING

During filling, pouches are held in place with our “posi-hold” gripper system. This allows for heavy weights and shock loads

without disturbing bag Position

SEALING

Digitally controlled ribbed or flat constant heat seal bars give a integral attractive seal. Pouches are sealed ''in place" eliminating wrinkles, folded corners and non aligned seals

MECHINE CONTROLS

System controls are fully solid state. utilizing a commercial Programmable Logic Controller [PLC] and pneumatics. Indicator

lights signal all cycle processes for easy monitoring.