Leading Specified Manufacturer Of Mining Machinery In China Over 20 Years

Specifications

Leading Specified Manufacturer Of Mining Machinery In China 

Contact: +86-13526578789

1. Machinery's Working Principle:

Jaw crusher Machinery’s main structure is rack, eccentric shaft, the pulley, flywheel, moving jaw, side shield, elbow board, elbow, the rear plate; transfer gap screw, spring reset; fixed plate and the activities of jaw board. And bracket also plays an important role in insurance. The machine’s leather belt and wheel are driven by the electric motor, and then the movable jaw begins to move up and down by the eccentric shaft. When the movable jaw moves from bottom to top, the angle between fixed jaw and movable jaw becomes bigger, then promotes the active board close to the fixed board. At the same time materials are extruded, molded, multi-roller crushed etc.

PE900X1200 Jaw Crusher Machinery For Delivery To Chile

When the movable jaw moves from top to bottom, the angle between fixed jaw and movable jaw becomes smaller, under the function of drag, rod and spring, the movable jaw plate deviate from the fixed jaw plate. At this moment the crushed materials are discharged from the bottom outlet of the crushing cavity. With the continuous rotation motor, the crusher is crushing and nesting cyclically.

Small Jaw Crusher Machinery In Stock

2. Machinery's Performance Characteristics:

1. Deep broken cavity, no dead zone, large feeding capacity and output.

2. Large crushing ratio, uniform size of products.
3. Safe and reliable lubrication system, convenient replacement of parts

4. Simple structure, reliable work, low operating costs.

5. Energy-saving equipment, single machine can save energy 15% -30%.

6. Large adjustment range of the nesting, it can meet different users’ requirements.

7. Low noise and less dust.

Ready Machinery In Stock

3. Machinery's Main Technical Parameters:

Machinery In Stone Production Site

4.Service Promise:

Before sale: Guide customers to choose the most suitable type of equipments; provide advanced, energy-saving and practical flow chart as well as responsible for designing the site.

On sale: Inspect the product seriously before out of the factory; invite customer for commissioning in the spot and raising the objection; organize to delivery according to the contract.

After sale: Company can send technical persons for guiding to install debug and train the workers.