polycarbonate sheet for carpot

polycarbonate sheet

 Specifications:

Trade Terms:

1.Payment by T/T or L/C

 100% payment if the total amount is less than USD15,000

 30% deposit and 70%  before shipment if the total amount is more than USD15,000

2.Delivery time:7-15 working days,subject to the order quantity

3.Delivery ways: DHL,UPS door to door service,by SEA, by AIR,etc.

4.MOQ:1*20GP

Application:

1.Commercial Building Lighting

2.Industrial architecture lighting

3.Stadium roof and indoor play area

4.Transportation infrastructure

5.Residential architecture lighting

6.Exterior–protected construction and curtain wall

7.Bathroom and swimming pool

Features:

1.Prohibit contact with wet cement surface and acid, alkaline material surfaces.

2.Prohibit contact with organic solvents and glue, paint composed thereof.

3.Keep the frame clean and the surface of rabbet groove flat. Dust and dirt of the sheet are generally wiped by soft cloth or sponge with mild detergent first and then washed by water thoroughly.

4.Choose the right thickness, allow flexure radius.

5.If use self –drilling screws for fixing, the hole must be pre-drilled, and the aperture should be 1.5 times larger than the diameter of the screw. Do not tighten the screw strongly, otherwise stress will arise, and crack on the sheet surface will appear.

6.Remain space for expanding, pay attention to inserting depth. Expanding Value = linear expansion coefficient × length × the maximum temperature variation (linear expansion coefficient of pc sheet is 7×10-5mm/mm/°C).

7.Use neutral glass cement and right gasket. Never use gasket of PVC material.

8.Use electrical tools (tungsten carbide saw) to cut, stabilize PC sheet to prevent their vibration. Don’t peel off protective film when cutting.

9.In case that marks have to be made before cutting, try to mark on protective film. If the marks must be made directly on PC sheets, use wax crayon instead of any sharp tool to mark.

10.Never peel off protective films until installation is completed.

11.It is suggested that smooth side is installed towards sun in order to realize the effect of the UV protective layer.

Our services:

1.Reply your inquiry in 8working hours.

2.Experienced staffs answer all your questions in fluent English

3.Customized desigh is available,OEM is welcomed.

4.Special discount and protection of sales area provided to our distributor.

Note:

1.We will offer you price referring to your detail request,so please kingdy inform w the thickness,size,color and other requirements you prefer,and the special offer will be given.

2.We can produce various polycarbonate sheet & PE films as per requirments of necessary,we can also give some some advice for reference.

3.The pictures above just for your reference.

4.Sample is available